StarTech.com USB56KEM3 User Manual

Instruction Manual

External V.92 56K USB Data/Fax Modem

USB56KEM3

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

• 1 x USB Modem

• 1 x RJ11 Cable

• 1 x Driver CD

• 1 x Instruction Manual

LED indicators

System Requirements

• USB enabled computer system with available USB port

• Microsoft® Windows® 2000/ XP/ Server 2003/ Vista/
Server 2008 R2/ 7 / 8 (32/64-bit)

Installation

Windows 2000/XP/Server 2003

1. Upon starting Windows, if

the “Found New Hardware”
wizard appears on the screen,
cancel/close the window and
insert the included Driver CD
into the computer’s
CD/DVD drive.

2. AutoRun will automatically

launch the Driver/Software
installation splash screen. If
not, open “My Computer” and
right-click on the CD/DVD
drive the disk is inserted into
and select “AutoRun”.

*screenshots for reference only

RJ11
connector

Windows Vista/7/Server 2008 R2

1. Upon starting Windows, if the
“Found New Hardware” wizard
appears on the screen, cancel/
close the window or choose
not to install the drivers and
insert the included Driver CD
into the computer’s
CD/DVD drive.

2. AutoRun should automatically
launch the Driver/Software
installation splash screen or
prompt you to run AutoRun.
exe. If not, open “Computer”
and right-click on the CD/DVD
drive the disk is inserted into
and select “AutoRun”.

USB type A connector

*actual product may vary from photos

3. Select the option to install the Drivers, then select your operating
system version. This should then launch the Driver
Installation wizard.

4. Complete the wizard and this should automatically install all
necessary drivers/software.

For the most up-to-date information, please visit: www.startech.com

3. Select the option to install the Drivers, then select your operating
system version. This should then launch the Driver
Installation wizard.

4. Complete the wizard and this should automatically install all
necessary drivers/software.

Manual Revision: 11/13/2013

Specications

Host Interface USB 2.0

Chipset ID Agere/LSI SV92U2C

Connectors

LEDs

Supported Modulations

(Modem)

Supported Modulations

(Fax)

ITU-T V.92, V.90, K56ex, V.34, V.32,

v.23, V.22 bis, V.22, V.21, Bell 212A and

V.17, V.29, V.27 Ter, V.21 channel 2

Data Compression V.44

Maximum Data Transfer

Rate

Power Adapter USB Powered

Enclosure Material Plastic

Operating Temperature 0°C ~ 55°C (32°F ~ 131°F)

Storage Temperature 10°C ~ 70°C (50°F ~ 158°F)

Humidity 20% ~ 80% RH

Dimensions (LxWxH) 75.0mm x 25.0mm x 18.0mm

Weight 25g

Compatible Operating

Systems

Windows 2000/ XP/ Server 2003/ Vista/

Server 2008 R2/ 7 / 8 (32/64-bit)

1 x RJ11 female

1 x USB type A male

1 x Data

1 x On Hold

103

56 Kbps Down

48 Kbps Up

Fax: 14.4 Kbps

LED Indicators

Name Description

Data Indicates when data is sending/receiving

OH Indicates the modem is in use (dialing/connected)

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur
these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the
third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.