StarTech.com USB3SMDOCKV User Manual
Instruction Manual
USB 3.0 Mini Docking Station w/ VGA, GbE, USB Pass-through
USB3SMDOCKV
Product Diagram
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Front View
Packaging Contents
• 1x USB 3.0 Mini Docking Station
• 1x USB Power Cable
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• USB enabled computer system with an available USB 3.0 port
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP SP3 (32),
• Mac OS® 10.6 and up (Tested up to 10.9)
• VGA enabled display device with cables (for external monitor)
Note: Only a USB 3.0 port interface and USB 3.0 cable can be used
to connect the Docking Station to the host computer.
*actual product may vary from photos
VGA Port RJ-45 Port
USB 3.0
Pass-through Port
Back View
Micro USB Port-Optional
Auxiliary Power Input
USB 3.0 Upstream Cable
(attached)
For the most up-to-date information, please visit: www.startech.com
Installation
Driver Installation
Depending on your Operating System version and whether or not
you have an active network connection, the Mini Docking Station
may auto-install once connected to an available USB 3.0 port on the
host system.
If the Mini Docking Station does not auto-install, follow the steps
below to complete the Driver Installation process.
Manual Revision: 09/10/2015
Windows / Mac
1. Download the latest drivers from the www.startech.com website
(recommended) applicable to the Operating System on the host
computer that you are connecting the Mini Docking Station to, or
insert the included Driver CD into your computer’s CD/DVD-ROM
drive.
2. If AutoPlay is enabled, select the “Open folder to view les”
option when the dialog appears and run the DisplayLink “.exe”
application.
3. If AutoPlay is disabled, browse to your CD/DVD drive location (or
to where the driver was downloaded) and run the DisplayLink
“.exe” application.
4. Follow any on-screen instructions to complete the driver
installation.
Note: You may be prompted to restart your system.
Hardware Installation
1. Connect the attached USB 3.0 Upstream Cable on the Mini
Docking Station to an available USB 3.0 port on the host
computer.
2. (Optional): Connect the included USB Auxiliary Power Input Cable
to the Mini Docking Stations Micro USB Port, and then to an
available USB Port on the host computer
3. Connect your VGA monitor to the VGA port on the Mini Docking
Station.
4. Connect any other devices to the Mini Docking Station as desired,
including your RJ-45 LAN Connection and/or a USB 3.0 peripheral.
Note: The Mini Docking Station includes an Auxiliary Power Input
Port (Micro USB Connector). If necessary the cable may connected
to draw additional power from the host computer in order to
suciently power all outputs simultaneously (VGA + RJ-45 + USB
3.0 @ 900mA).
Display Conguration
Use your Windows or Mac operating system to adjust display
settings for multiple monitors.
Supported Video Resolutions
The docking station supports VGA video output at resolutions up to
2048x1152.
Note: Depending on the conguration and supported resolutions
of your connected monitors, the docking station may support video
resolutions lower than those specied above.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...