StarTech.com USB32DVIPRO User Manual

USB 3.0 to VGA External Video Card
USB 3.0 to HDMI External Video Card
USB 3.0 to DVI External Video Card

USB32VGAPRO / USB32HDPRO / USB32DVIPRO

Note: Computer systems running Windows® 7 or higher will install software and drivers

automatically upon connecting the USB Display Adapter. If your computer system is running
a previous versions of Windows or any version of Mac OSX®, please ensure the software has
been installed before the USB Display Adapter is connected (See Installation).

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 05/28/2014

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual

Table of Contents

Introduction ............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements .............................................................................................................................. 1

Installation ..............................................................................................2

Windows Installation ............................................................................................................................... 2

Mac OSX Installation ................................................................................................................................ 3

Multiple USB Video Adapter Installation ..........................................................................................4

Conguring the USB Video Adapter .................................................... 5

Windows® ..................................................................................................................................................... 5

Mac OSX ....................................................................................................................................................... 8

Specications ..........................................................................................10

Technical Support .................................................................................. 11

Warranty Information ............................................................................11

Instruction Manual

i

Introduction

Packaging Contents

• 1x USB 3.0 Video Adapter

• 1x Driver/Software CD

• 1x Instruction Manual

• 1x DVI-to-VGA Adapter (for USB32DVIPRO only)

System Requirements

• VGA-enabled display (e.g. Monitor, Projector, Television) (for USB2VGAPRO)
Or
HDMI-enabled display (e.g. Projector, Television) (for USB2HDPRO)
Or

DVI-enabled display (e.g. Monitor, Projector) (for USB2DVIPRO)

• USB-enabled computer system with available USB 3.0 or 2.0 port

Note: These USB Display Adapters perform best when using a USB 3.0 port.

• Microsoft® Windows 8/8.1 (32/64-bit), 7(32/64-bit), Vista(32/64-bit), or Mac OSX®

• CPU: Quad Core 2.4GHz or Higher (i5 recommended)

• RAM: 4GB or higher

Instruction Manual

1

Installation

Windows Installation

Computer systems running Windows® 7 or higher will install software and drivers
automatically upon connecting the USB Display Adapter. If your computer system is
running a previous versions of Windows please ensure the software and drivers have
been installed before the USB Display Adapter is connected (Installation steps below).

Note: If your computer system is running Windows 7 or higher please proceed to step
4, as steps 1 - 3 are not required.

1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver CD into your CD/DVD-ROM drive.

2. Locate the Setup application le (Setup.exe). This le will be located in the root
directory of the Driver CD (e.g. D:\) or downloaded le.

3. Executing the Setup.exe application will launch the installation wizard. Please
click armatively on each of the subsequent installation screens to complete the
installation. The Install wizard will vary for dierent versions of Windows. The set-up
program will install the device driver and software application once completed.

Note: The screen may ash or go black during installation. No additional message will
be displayed to alert that the installation has completed.

Instruction Manual

2