USB 3.0 to Displayport External Video
Card Multi Monitor Adapter
USB32DPPRO
WARNING! Install Drivers before plugging in USB video adapter.
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 08/15/2013
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Windows Installation ............................................................................................................................... 2
Mac OSX Installation ................................................................................................................................ 3
Multiple USB Video Adapter Installation ..........................................................................................4
Conguring the USB Video Adapter ....................................................5
Technical Support ..................................................................................11
Warranty Information ............................................................................11
Instruction Manual
i
Introduction
The USB32DPPRO USB 3.0 to DisplayPort® Multi Monitor Adapter functions as an
external DisplayPort video card, turning an available USB 3.0 port into a DisplayPort
output, with support for high resolution 2560x1600 video, and 5.1 surround sound
audio. The USB 3.0 DisplayPort adapter delivers a convenient, high-performance
external video solution that makes it easy to add multi-monitor capability to a
USB 3.0-enabled desktop or laptop computer (optimal performance from USB 3.0,
backward compatible with USB 2.0).
Leveraging the high-bandwidth (5 Gbps) SuperSpeed USB 3.0 interface, the adapter
delivers smooth, high-denition content to your DisplayPort-capable display, and can
be used to mirror your primary desktop, showing the same image on each display, or
to extend your desktop to double your workspace and increase your productivity.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Note: Connect a maximum of ve USB32DPPRO adapters on a single PC - See system
requirements
Packaging Contents
• 1x USB 3.0 to Displayport Adapter
• 1x Driver CD
• 1x Installation Guide
System Requirements
• USB enabled computer system with available USB 3.0 or 2.0 port
• CPU: Quad Core 2.4GHz or Higher (i5 recommended)
• RAM: 4GB or higher
• Microsoft® Vista(32/64-bit) 7(32/64-bit) or Mac OSX®
Instruction Manual
1
Installation
Windows Installation
Please ensure that the driver installation is complete prior to the physical
installation (plugging in) of the USB 3.0 Video Adapter
1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver CD into your CD/DVD-ROM drive.
2. Locate the Setup.exe application. This le will be located in the root directory of the
Driver CD (e.g. D:\) or downloaded le.
3. Executing the Setup.exe application will launch the following screen. Please click I
Accept to start installation process. The set-up program will install the device driver
and software application respectively.
*Ensure that the USB Video Adapter is not connected to the host computer.
*The screen may ash or go black during installation. No additional message
will be displayed to alert that the installation has completed.
Instruction Manual
2
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.