StarTech.com USB2VGA2 User Manual

USB2VGA2

Instruction Manual

USB to VGA Adapter

USB 2.0 to VGA External Multi

Monitor Video Adapter - High

Resolution

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea­sonable protection against harmful interference in a residential installation. This equip­ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com­munications. However, there is no guarantee that interference will not occur in a particu­lar installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver •

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and
do not represent an endorsement of a product or service by StarTech.com, or an en­dorsement of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgement elsewhere in the body of this doc­ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.

Table of Contents

Introduction .....................................................................1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Installation ....................................................................... 1

Windows 2000/XP .......................................................................1

Windows Vista ............................................................................. 3

Multiple USB Video Adapter Installation ......................................5

Configuring the Adapter ................................................. 6

USB 2.0 to VGA Adapter Properties ............................................7

Virtually Repositioning Your Displays...........................................8

Troubleshooting .............................................................. 8

Specifications .................................................................. 10

Supported Resolutions ................................................... 10

Technical Support ........................................................... 11

Warranty Information ...................................................... 11

i

Introduction

Packaging Contents

1 x USB2VGA2 video adapter•

1 x Driver CD•

1 x User Manual•

System Requirements

Pentium 4 / Celeron family or AMD K6 / Athlon / Duron family with •

1.5GHz or more CPU Clock Speed

256MB RAM or higher (1GB or higher recommended for playing •
DVDs)

An available USB 2.0 port•

VGA compatible monitor/display•

Microsoft Windows•
NOTE: Aero desktop theme not supported

®

2000/XP/Vista/7 (32/64-bit)

Installation

Please ensure that the driver installation is complete prior to the
physical installation of the USB 2.0 to VGA adapter.

Windows 2000/XP

Insert the Driver CD into your CD/DVD-ROM drive.1.

If the installation program does not begin automatically, locate the 2.

Setup.exe application. This file will be located in the root directory
of the Driver CD.

1

Executing the Setup.exe 3.

application will launch the
following screen. Please click
on Next:
*Ensure that the USB Video

Adapter is not connected
to the host computer.

Once driver installation is 4.

complete, you will reach the
following screen. Click on the
“Finish” button.

Plug in the USB Video Adapter. Windows will then install the 5.

drivers for the adapter.

Once the Windows has 6.

finished the driver installation,
it will prompt you to restart
the computer. Select “Yes, I
want to restart my computer
now”, and click the “Finish”
button.

2