StarTech.com SVUSB3DSA User Manual
2 Port USB 3.0 Dual System KVM Swap
Adapter with File Transfer
SVUSB3DSA
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 03/19/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements .............................................................................................................................. 2
Installation .............................................................................................2
Verifying Installation .............................................................................6
Operation ................................................................................................7
Keyboard and Mouse Sharing .............................................................................................................. 7
Display Sharing .......................................................................................................................................... 8
File Transfer ..................................................................................................................................................10
Hiding / Re-Opening the Toolbar ........................................................................................................11
Specications ..........................................................................................12
Technical Support .................................................................................. 13
Warranty Information ............................................................................13
Instruction Manual
1
Introduction
Packaging Contents
• 1x USB 3.0 Dual System Swap Adapter
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• Available USB 2.0/3.0 port (USB 3.0 recommended)
• CPU: Intel Core i3 2.8GHz or higher
• RAM: 2GB memory or higher
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Installation
Notes:
• The adapter should not be connected to either system until the software is installed
and the system has been restarted.
• It is not recommended to connect the USB 3.0 Dual System Swap Adapter via an
external USB Hub.
• It is recommended to un‐install other USB to Graphics drivers before installing USB
3.0 Dual System Swap adapter drivers (they can be re-installed afterwards).
1. Insert the included Driver CD into your CD/DVD drive.
2. On the rst of your 2 systems that will be connected to the adapter, run the Setup.
exe application from the Autoplay menu. If Autoplay is disabled on your system,
browse to your CD/DVD drive and run the application.
Instruction Manual
2
3. Follow the on-screen instructions to complete the installation, and restart the
system when prompted.
4. Repeat the software installation on the second system, and restart when complete.
5. Connect the adapter to an available USB port on both computers. The drivers may
take a moment to congure before displaying the “Settings” screen (shown below).
Click the arrow to begin.
Note: The software uses color (blue and green) to help you distinguish which
computer you are connected to / making adjustments on, with a matching colored
logo on the connectors of the device.
Instruction Manual
3
Loading...