StarTech.com SV431DUSB, SV1631DUSB, SV831DUSB User Manual
SV431DUSB
SV831DUSB
SV1631DUSB
Instruction Manual
Professional USB Console
KVM Switch
4/8/16 - Port 1U Rack Mount
USB and PS/2 KVM Switch
with OSD
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver •
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
Table of Contents
Introduction ..................................................................... 1
Packaging Contents.....................................................................1
System Requirements .................................................................1
Installation ....................................................................... 2
Console Installation .....................................................................2
Computer Installation...................................................................3
Cascaded configurations .............................................................4
Operation ......................................................................... 6
OSD (On Screen Display) Operation ...........................................7
Hot-key commands ......................................................................12
Specifications .................................................................. 16
Technical Support ........................................................... 17
Warranty Information ...................................................... 17
i
Introduction
Thank you for purchasing a StarTech.com Professional USB Console
KVM Switch. This product offers a reliable and efficient way to manage
multiple computers in server rooms, or any other environment where
space is at a premium. The switch features an on-screen display that
allows comprehensive monitoring of computer naming and selection as
well as status indication.
Packaging Contents
1 x Professional KVM Switch•
1 x PS/2 keyboard and mouse “Y” cable•
2 x Rack Mount Bracket•
1 x Power Adapter•
1 x Instruction Manual•
System Requirements
VGA and USB and/or PS/2 enabled computer systems•
VGA enabled display device•
StarTech.com 3-in-1 “SVECON” (PS/2) or 2-in-1 “SVECONUS” •
(USB) KVM cables
Standard 104-key wired USB or PS/2 keyboard•
Standard 3-button wired USB or PS/2 keyboard•
NOTE: SV431DUSB can only use a USB keyboard and mouse
1
Installation
NOTE: Prior to the installation, please power off all devices that will be
connected to this system.
Ensure that all devices you will connect are properly grounded.
Place cables away from fluorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
Console Installation
The SV831DUSB and SV1631DUSB are designed to use both USB
and PS/2 console connections, and are equipped with a slide switch
console selector for the selection of USB or PS/2 modes. There are
three connection patterns that correspond with the slide switch as
follows:
PS/2 Keyboard and PS/2 Mouse: A PS/2 “Y” cable (provided) is
required for this mode.
Slide Switch selection:
PS/2 mouse and
keyboard
PS/2 Keyboard and USB Mouse: Slide switch to the center position
Slide Switch selection:
PS/2 keyboard and
USB mouse
2
USB Keyboard and USB Mouse: Slide switch to the far right position.
Slide Switch selection:
USB keyboard and USB mouse
NOTE: When configuring the switch as a Slave in a cascaded
configuration, PS/2 Keyboard and Mouse is the only mode that can
be used. Therefore, SV431DUSB cannot be configured as a slave in a
cascaded setup, as it does not provide a slide switch selector.
Computer Installation
USB Computer
To connect a computer controlled through USB, use a StarTech.com
2-in-1 Ultra-Thin USB KVM cable (Product ID: SVECONUS) to connect
from one of the PC Ports located on the rear panel of the KVM switch
to the USB and VGA ports on the computer system.
VGA port
StarTech.com Ultra-Thin KVM Cable
PS/2 or USB
port
3
PS/2 Computer
To connect a computer controlled through PS/2, use a StarTech.com
3-in-1 Ultra-Thin PS/2 KVM cable (Product ID: SVECON) to connect
from one of the PC ports to the PS/2 keyboard and mouse, as well as
the VGA port of the computer system.
Cascaded congurations
NOTE: The master must have equal or more PC ports than that of the
slave. For example, if an 8-port switch is the Master, an 8-port or 4-port
switch can be a Slave, but not a 16-port switch.
NOTE: PS/2-only models can be cascaded with USB+PS/2 universal
models.
NOTE: To be used as Slaves in a cascaded configuration, the slide
switch on SV831DUSB or SV1631DUSB must be adjusted to PS/2
mode.
The ports labelled PC 1 - PC 8 can be connected to either a computer
or a Slave’s CONSOLE por t. The ports marked PC A - PC H can
only be connected to computers. Use only the 3-in-1 (PS/2) cables to
connect the Master’s PC ports and Slave’s CONSOLE port.
Slave KVM switch
Master KVM switch
Slave KVM switch
4
Loading...