StarTech.com SV231MDPU2 Instruction Manual

Manual Revision: 01/21/2016

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

SV231MDPU2

2 Port Mini DisplayPort KVM Switch with USB

2.0 and KVM Cables

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual

i

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Rear View ...................................................................................................................................................... 1

Introduction ............................................................................................ 2

Packaging Contents .................................................................................................................................2

System Requirements ..............................................................................................................................2

Installation ..............................................................................................3

Hardware Installation ..............................................................................................................................3

Software Installation ................................................................................................................................ 4

Switch between computers .................................................................................................................. 4

Operation ................................................................................................5

Switching between systems..................................................................................................................5

Specications .......................................................................................... 6

Technical Support ..................................................................................7

Warranty Information ............................................................................ 7

Instruction Manual

1

Product Diagram

Front View

Rear View

USB keyboard,

mouse, and hub ports

PC select button

Console monitor

connection

PC and server KVM

connections

Instruction Manual

2

Introduction

Packaging Contents

• 1 x 2-port Mini DisplayPortTM KVM switch

• 2 x 4 ft (1.2 m) DisplayPort KVM cables

• 1 x instruction manual

System Requirements

• DisplayPort display (monitor, projector, TV, etc.)

• DisplayPort output and an available USB port per computer

• USB keyboard and mouse

• A video source and display that support 4K at 60 Hz

Note: The SV231MDPU2 KVM switch supports DisplayPort 1.2.

Instruction Manual

3

Installation

Hardware Installation

1. Connect a DisplayPort monitor into the DP OUT connector on the back of the KVM switch.

2. Connect a USB keyboard and mouse into the USB ports on the front of the KVM

switch.

3. Connect the included DisplayPort USB KVM cables to each PC, and then to the PC1

and PC2 ports on the back of the KVM switch.

Instruction Manual

4

4. (Optional) If you have another USB peripheral that you wish to share between the

connected computers, connect the USB peripheral to the USB hub port on the front of
the KVM switch.

5. Turn on the rst computer or device; when it is nished starting up, make sure that

the keyboard and mouse are working properly.

6. When you have conrmed that the keyboard and mouse are working properly,

switch to the next port and repeat step 5.

You should be able to switch between ports now.

Notes

The KVM switch does not detect if connected systems are turned on or turned o, so if
you switch to a computer that is turned o, nothing will be displayed on the monitor.

Where possible, we recommend that you use the same resolution for both connected
systems to avoid changing the screen resolution when switching between ports.

Switch between computers

To switch between computers, do any of the following:

1. Press the PC select button on the KVM switch.

2. Download the switching software and use it on your computer to switch between
connected computers.

3. Use hotkey switch commands. Note: Hotkey switch commands are only supported
on computers running Windows.

Software Installation

The KVM switch oers optional switching software that can be used to switch between
the connected PCs with a single click.

Supported operating systems

• Windows® 8 and Windows 8.1 (32/64 bit)

• Windows 7 (32/64 bit)

• Windows Vista® (32/64 bit)

• Windows® XP (32/64 bit)

• Mac OS 10.3 and later (tested up to 10.10)

Note: Regardless of the operating system that you use, you can switch between the
connected PCs by using the select button on the front of the KVM switch or by using
hotkeys.

1. Open a browser and navigate to www.startech.com/Downloads.

2. In the Enter Product ID eld, enter SV231MDPU2 and download the software.

Instruction Manual

5

Operation

Switching between systems

To switch between your connected systems, do any of the following:

• Press the SELECT button on the front of the KVM switch.

• Press Scroll Lock+Scroll Lock.

• If software is installed, click the green circular icon in the toolbar.

Windows

Mac OS

3. Browse to the location where you saved the le and run the Setup.exe (Windows)

or USB KVM.dmg (Mac OS) application.

4. Follow the on-screen instructions to complete the installation.

Instruction Manual

6

Specications

Number of KVM Ports 2

PC Video Type DisplayPort 1.2

PC Interface USB

Audio Support DisplayPort Audio

Console Connectors

1 x Mini DisplayPort (20 pin) Female

3 x USB A (4 pin) Female

Host Connectors

(per port)

1 x Mini DisplayPort (20 pin) Female

1 x USB B (4 pin) Female

LEDs 2 x PC Selection Indicator

Switching Modes

Pushbutton, Hotkey, Software

Note: Hotkey switch commands are only

supported on computers running a version

of Windows OS

Maximum Resolution

4K - 3840 x 2160 @ 60 Hz (supporting

video source and display required) - MST

Enclosure Type Steel

Operating Temperature 0°C to 40°C (32°F to 104°F)

Storage Temperature -20°C to 60°C (4°F to 140°F)

Humidity 0~95% RH Non-Condensing

Cable Length 1.2 m

Dimensions (LxWxH) 177 x 80 x 24 mm

Weight 350 g

Instruction Manual

7

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.