StarTech.com SLMSOPTB User Manual

Installation Guide

USB to Slimline SATA CD/DVD Optical Drive Enclosure

SLMSOPTB

Front View

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l’utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l’uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

Packaging Contents

• 1 x SLMSOPTB enclosure

• 1 x USB “Y” cable

• 1 x Package of screws

• 1 x Set of rubber feet

• 1 x installation Guide

System Requirements

• Slimline SATA CD/DVD optical drive

• USB enabled computer system with available port

• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7

(32/64-bit), or Apple® Mac OS® X, or Linux

®

Installation

1. Using a screw driver, remove the two small screws from the rear
panel of the enclosure and remove the plastic bezel.

2. The drive tray should now slide out from the front of the
enclosure.

3. Slide the slimline SATA optical drive into the drive tray from the
from the front. Make sure the line up the slimline SATA connector
on the drive to the connector at the rear of the tray.

4. Once rmly seated, use the provided screws to secure the drive to
the tray using the mounting points on the side of the drive/tray.

Rear View

USB type mini-B
connector

5. Insert the assembled drive tray back into the enclosure housing.

6. Replace the plastic rear bezel and fasten using the previously
removed screws.

7. Connect the provided USB cable from the enclosure to the host
system. No driver installation is required.

NOTE: Only the Primary USB connector needs to be connected
to the host system. If the optical drive requires more power than
can be drawn from a single USB connector, then the Secondary
connector may also be necessary.

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 04/08/2011

Specications

Bus Interface

USB 2.0

ChipsetID Sunplus SPDF303

Connectors 1 x USB type mini-B

Material

Aluminum (enclosure)
Plastic (drive tray)

Power Adapter None (USB powered)

Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)

Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F)

Humidity 10 ~ 90% RH

Dimensions 151.0mm x 136.0mm x 20.0mm

Weight 270g

Compatible Operating Systems

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names & Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of
third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body
of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related documents are the property of their
respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.
If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of
online tools, documentation, and downloads.

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted,
following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not war rant
its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees
or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise),
loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Windows 2000/XP/Server 2003/Vista/
Server 2008 R2/7 (32/64-bit), Mac OS X, Linux