StarTech.com S25SLOTR User Manual
Instruction Manual
2.5in SATA Removable Hard Drive Bay for PC Expansion Slot
S25SLOTR
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
*actual product may vary from photos
• 1 x S25SLOTR hard drive rack
• 1 x 7-pin SATA cable
• 1 x LP4 molex to SATA power adapter and LED header
• 1 x Installation Guide
• 1 x Mounting Screw
• 1 x Hard Drive Protective Film
System Requirements
• Available rear expansion slot (full height)
• 2.5” SATA 1.5 or 3 Gb/s Hard Drive
Installation
1. Turn your computer o and any peripherals connected to the
computer (ie. Printers, external hard drives, etc.). Unplug the power
cable from the rear of the power supply on the back of the computer.
2. Remove the cover from the computer case.
3. Locate an open expansion slot and remove the metal cover plate
on the rear of the computer case.
4. Place the Hard Drive Rack into the open expansion slot and screw
the bracket to the rear of the case. It will straddle any expansion
slot on the motherboard.
5. Connect the SATA data cable from the Hard Drive Rack to the
SATA port on your hard drive controller.
6. Use the LP4 molex to SATA power adapter cable to connect an
LP4 molex from the computer power supply to the SATA power
connector on the Hard Drive Rack. Connect the 4-pin LED header
from the adapter to the connector on the rack.
7. Place the cover back onto the computer.
8. Insert the power cable into the socket on the power supply.
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 02/24/2012
Specications
Bus Interface SATA
Internal Connectors
LEDs 1 x Power/Activity
Hard Drive Compatibility
Operating Temperature 0 - 55° C
Dimensions 120.0 mm x 145.0 mm x 21.0 mm
Weight 158.4 g
7-pin SATA data, 15-pin SATA
power, 4-pin LED header
2.5” SATA Hard Drive, 9.5 mm
height
How to Use
1. Slide the door latch gently and the bay door will spring open,
then fully open the bay door. If a hard drive is currently in the
bay, opening the door will eject the hard drive.
2. Place a hard drive into the bay opening and insert it 3/4 of the
way in.
3. Close the door, which should insert the hard drive fully into the
bay. The door latch should automatically engage.
Front View
Swinging
Rear View
Sliding
Door Latch
Bay Door
Power/
Activity LED
15-pin SATA
power
LED header
connector
7-pin SATA data
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...