StarTech.com POEINJ1G User Manual
Instruction Manual
Gigabit PoE+ Injector 48V / 30W - Wall-Mountable
POEINJ1G
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x POE+ Injector
• 4 x Mounting Screws
• 1 x Universal Power Adapter
• 3 x Power Cords (NA/UK/EU)
• 1 x Instruction Manual
System Requirements
• RJ45 terminated Cat5 or higher Ethernet cabling
• 10/100/1000 Mbps compatible Ethernet network
Installation
1. Connect an Ethernet cable from the desired source network
device (i.e. computer, router, non-PoE switch, etc.) to the “GbE”
RJ45 connector of the PoE Injector.
2. Connect an Ethernet cable to the “GbE + PoE” connector on the
PoE Injector unit.
3. Connect the other end of the cable used in Step 2 to either a PoE+
/ PoE-compliant device, or to a POE Splitter to separate data and
power on the device end.
4. Plug the included AC power adapter to an outlet and connect to
the PoE Injector. Ensure that the power LED is lit
Typical PoE Injector Application
Up to 100 Meters
Non-PoE Ethernet
Switch/HUB
Gigabit
Ethernet
Gigabit
Ethernet
Gigabit Ethernet + PoE
POEINJ1G
Gigabit
Ethernet + PoE
POEINJ1G
DC Power
Gigabit Ethernet
Gigabit Splitter
PoE PD Device
Non-PoE Device
*actual product may vary from photos
Specications
Connectors 2 x RJ-45 (Female)
Maximum Data Transfer Rate 1 Gbps
Industry Standards
Power Output (PoE) 48VDC, 30 watts
PoE Power output pin RJ45 Pin 3,6(V+), Pin 1,2(V-)
Power Consumption 2 Watts
Power Adapter 48VDC, 0.75A
Enclosure Material Plastic
LED
Operating Temperature 0°C to 45°C (32°F to 113°F)
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Humidity 10~90% RH (Non-Condensing)
Dimensions 263 x 87 x 34 mm
Weight 138 g
IEEE802.3, 802.3u, 802.3ab PoE,
IEEE802.3af, 802.3at
1 x Power (Solid: Power is being
supplied; O: No power is being
supplied)
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 01/10/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...