PCI Express Video Capture Card for HDMI®,
DVI and Component - 1080p
PEXHDCAP
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 03/28/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Record Files ................................................................................................................................................. 4
Record Settings .......................................................................................................................................... 6
Video Streaming .....................................................................................6
Streaming using RTMP Streaming Service Provider .................................................................... 6
Streaming with HLS using Appserve ................................................................................................. 12
Technical Support .................................................................................. 17
Warranty Information ............................................................................17
Instruction Manual
i
Introduction
The PEXHDCAP PCI Express HD Video Capture Card enables you to capture highdenition video and audio from an HDMI®, DVI or Component (1080p) source to your
computer through a PCI Express expansion slot.
Support for full 1080p video input, as well as HDMI and RCA stereo audio makes this
HD capture card the perfect solution for creating digital copies of your videos for
editing and compiling. The added versatility of 3 dierent video inputs (HDMI, DVI,
Component), plus the ability to capture VGA input using the included DVI to VGA
adapter, gives you the freedom to connect a multitude of audio-video devices to your
computer, quickly and easily.
This PCI Express capture card supports NTSC and PAL systems, and comes complete
with an easy to use video capture software suite, allowing you to record video or take
still screenshots and save them to your PC.
Packaging Contents
• 1 x PCI Express Video Capture Card
• 1 x RCA Component Breakout Cable
• 1 x DVI to VGA Adapter
• 1 x Driver CD
• 1 x Instruction Manual
System Requirements
• PCI Express enabled computer system with available PCIe slot
WARNING! PCI Express cards, like all computer equipment, can be severely damaged by
static electricity. Be sure that you are properly grounded before opening your computer case
or touching your PCI Express card. StarTech.com recommends that you wear an anti-static
strap when installing any computer component. If an anti-static strap is unavailable, discharge
yourself of any static electricity build-up by touching a large grounded metal surface (such as the
computer case) for several seconds. Also be careful to handle the PCI Express card by its edges
and not the gold connectors.
Hardware Installation
1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,
external hard drives, etc.). Unplug the power cable from the rear of the power
supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See documentation for your computer
system for details.
3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the
computer case (Refer to documentation for your computer system for details.). Note
that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).
4. Gently insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
5. Place the cover back onto the computer case.
6. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
Driver/Software Installation
1. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. AutoPlay should automatically prompt you to run “Setup.exe”. If not, open “My
Computer” and double-click on the CD/DVD drive. Double-click the “Setup.exe” icon.
3. Proceed through the Installation wizard.
4. Complete the wizard and this should automatically install all necessary drivers/
software. An icon for “StreamCatcher” should now be on the desktop.
Instruction Manual
2
How to Use
Connect the video/audio source to the video capture card using the appropriate
cable(s). To connect a VGA source, use the included DVI to VGA adapter. If you wish to
input audio from a source other than HDMI, make sure to connect the breakout cable
and connect the audio source using stereo RCA cables (red/white).
Stream Catcher
Double-click the “StreamCatcher” icon on the desktop to launch the video
capture application. This will bring up the main menu screen that contains
the video preview window and recording controls. Additional options and
congurations can be accessed through the Main Menu.
Initial Setup Note: If you have a video source connected, but are not able to view
anything in the video window, go to the “Settings” section rst, to make sure the
“device” is congured properly. If using an HDCP protected video source (i.e. retail
Blu-Ray movie), this will also result in no video preview/capture.
Menu
Video
Window
Record/Stop
button
Manually recording video can be done by simply pressing the “Record” button from the
control menu along the bottom of the Stream Catcher window. The frame around the
video window will turn red, while recording. When you wish to stop recording, press the
“Stop” button. The “Snapshot” button allows of taking a screen capture of the video stream.
Instruction Manual
Snapshot
button
Volume Control
3
*screenshots are for reference only
Snapshot Files
Clicking this button will open the folder location where all of the snapshot les are
saved in Windows.
Record Files
Clicking this button will open the folder location where all of the recorded video les
are saved in Windows.
Instruction Manual
4
Schedule Recording
The software can be setup to start recording at a specic time and date and occur once
or multiple times. Setup the schedule and click the “Add” button to save it. Multiple
schedules can be maintained at the same time. To remove a schedule, simply select it
from the list, and click the “Delete” button.
Settings
The Settings menu is broken into dierent sections for conguring various aspects of
the software. System Settings contains conguration options for the user interface.
Device Settings
Contains conguration options for the video capture hardware. Video and audio input
source (HDMI, component, DVI/VGA), video system (NTSC/PAL), aspect ratio and video
properties (sharpness, contrast, saturation, hue, brightness) can all be adjusted from
this menu.
Instruction Manual
5
Record Settings
Contains settings related to video recording and snapshots. The location to save
recorded video les as well as recording quality can be congured. The location to
save the snapshot images and le format (JPG, BMP) are also set here.
Video Streaming
Streaming using RTMP Streaming Service Provider
1. Obtain the RTMP settings for your video streaming service. The below steps show
how to obtain these settings from Justin.TV and Twitch.
Note: Steps may vary from dierent streaming service providers, please contact your
service provider for specic details.
For Justin.tv
1. Open your web browser, and browse to the following website:
http://www.justin.tv
2. Login and select Dashboard from manager your account.
Instruction Manual
6
3. Select My Channel from the left side menu, followed by INFO
4. In the lower section of this page, you will nd Stream Key: Click Show, you will see
the key.
Instruction Manual
7
For Twitch
1. a) Open your web browser, and browse to the following website:
http://www.Twitch.tv
b) Login and select Dashboard from your account drop down menu.
c) In the top left select Streaming Apps.
Instruction Manual
8
d) Click the Show Key button, you will see the key.
Instruction Manual
9
2. Open the Stream Catcher Program, and then select RTMP
3. Obtaining the streaming URL from your Streaming service provider.
Note: This is specic to your service provider and will likely contain the key located
in the Step 1.)
4. In the eld marked Streaming Public URL, type the Public URL for your streaming
service followed by.
Note: this will be specic to your service. In the example below we are using Justin.
tv. The Justin.tv URL is comprised of “rtmp://live.justin.tv/app/” followed by your
stream key.
5. Return the screen catcher home page and click the blue record dot (pictured
below).
Instruction Manual
10
6. The video will now be streamed to your Streaming service.
Instruction Manual
11
Streaming with HLS using Appserve
1. Download and install appserv from the following URL:
http://www.appservnetwork.com/
2. Locate your IP address.
Windows 8
a) Open Control panel
b) Click Network and Sharing Center
c) Click Local Area Connection 2
d) Click the Details button
e) The IP Address is displayed.
Instruction Manual
12
Note: Steps for obtaining IP address will vary from operating systems. Please
contact your system administrator for further details
3. Open the Stream Catcher Program, and then select HLS
4. In the Streaming Public URL, type your IP address followed by: live/session0.m3u8
Instruction Manual
13
5. Return the screen catcher home page and click the blue record dot
(pictured below).
6. Using a dierent device on your network (Tablet, laptop, etc.) open a web browser
and type the full URL used in step 5. The URL is built using your computer IP address
with the following at the end: live/session0.m3u8
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
17
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.