StarTech.com PEX2PCI4 User Manual
PCI Expansion Bay
PEX2PCI4
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver •
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the property of their
respective holders.
Instruction Manual
Instruction Manual
Table of Contents
Introduction ................................................................................... 1
Features ......................................................................................1
Package Contents .......................................................................1
Installation ...................................................................................... 2
Using the PCI Express Adapter (typical) ....................................2
Using the ExpressCard Host Adapter Card ................................4
Software Installation ....................................................................5
Specifications ................................................................................ 7
EC2PCI (optional)........................................................................7
Accessory Products from StarTech.com .................................... 8
Technical Support ......................................................................... 9
Warranty Information .................................................................... 9
i
Instruction Manual
Introduction
Thank you for purchasing a StarTech.com PCI Express to Four Slot PCI
Expansion Bay. This product allows you to add PCI expandability to your
computer, using an available PCI Express or ExpressCard* slot, helping
to bridge the gap between older PCI expansion cards and motherboards
with newer interface capabilities.
Features
Supports 1x 2.5Gb/s PCI Express Data Transfer Rates•
IPCI Slots are fully PCI Bus Rev. 2.3 Compliant•
Supports both 5V and 3.3V Add-in Cards•
Supports Windows 2000/2003/XP/ Vista™ •
Package Contents
1 x PCI Expansion Bay•
1 x PCI Express Card •
1 x DVI Cable•
1 x Power Adapter•
1 x Instruction Manual•
1 x Driver CD•
1 x Instruction Manual•
1 x Screw Kit •
Accessories
*Please note that PEX2PCI4 can be connected to a host computer ExpressCard port, using the EC2PCI ExpressCard to PCI adapter, in place
of the PCI Express Card adapter that is packaged with PEX2PCI4.
As such, if you wish to connect to the PEX2PCI4 using an ExpressCard
connection, EC2PCI is a required accessory.
1
Loading...