StarTech.com NETRS232485 Instruction Manual

Manual Revision: 05/07/2015

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

NETRS232485

Industrial 1 Port RS232/422/485 to Dual
Ethernet Serial Device Server

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority
to operate the equipment.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual

i

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Side 1 ............................................................................................................................................................. 1

Side 2 ............................................................................................................................................................. 1

Introduction ............................................................................................ 2

Packaging Contents .................................................................................................................................2

System Requirements ..............................................................................................................................2

DB-9 Connector Pinout .........................................................................3

DIP Switch Conguration ...................................................................... 3

Installation ..............................................................................................4

Hardware Installation ..............................................................................................................................4

Software Installation ................................................................................................................................ 4

Operation ................................................................................................5

Using the DS-Tool ...................................................................................................................................... 5

Using the Logging Feature .................................................................................................................... 6

Specications .......................................................................................... 8

Technical Support ..................................................................................9

Warranty Information ............................................................................ 9

Instruction Manual

1

Product Diagram

Front View

1. LED for PWR1

2. LED for PWR2

3. LED for Ethernet Port 1

4. LED for Ethernet Port 2

5. LED for Serial Port

Side 1

1. Terminal Block PWR1 (12~48V DC)

2. Power Jack PWR2 (12~48V DC)

3. 2x Ports RJ45 10/100

Side 2

1. Reset Button

2. DB-9 Serial Port

3. DIP Switch

Instruction Manual

2

Introduction

Packaging Contents

• 1x Serial over IP Device Server

• 1x DIN-Rail Kit

• 1x Wall-Mount Kit

• 1x Software CD

• 1x Installation Guide

System Requirements

• Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server
2012, 2008 R2, 2003(32/64).

Instruction Manual

3

DB-9 Connector Pinout

DIP Switch Conguration

DIP 1 DIP 2 Termination Conguration

ON ON Termination for long distance 4-wire RS485/422

ON OFF Reserved

OFF ON Termination for long distance 2-wire RS485

OFF OFF No termination for RS485/ 422 (short distance)

Instruction Manual

4

Installation

Hardware Installation

The server can be installed on a DIN rail or it can be wall-mounted.

Installation on a DIN-Rail:

1. Tilt the unit, making sure that the metal spring located at the back is positioned on
top of the DIN rail.

2. Push the unit towards the rail until a “click” sound is heard.

Installation on a Wall:

1. Remove the DIN-rail kit, if it is installed on the unit.

2. Install the wall-mount panel included using the 3 screws found in the package.

3. Mount the unit on the wall using the appropriate hardware for the surface you are
mounting to.

Software Installation

1. Insert the provided CD into your DVD/CD-ROM drive.

2. Browse to the folder fscommand\Utility\DS-Tool and execute the installer
Startech_V1.0_xxxxxxx.

3. Follow the on-screen instructions to complete the installation.

Instruction Manual

5

Operation

Using the DS-Tool

1. Start the DS-Tool, and click Install this driver software anyway.

2. Allow access to the DS-Tool on the Windows Firewall.

3. Once the utility opens, click the Broadcast button to detect the device server. The
default IP address of the device is 192.168.10.2.

4. Once detected, click the checkbox beside the device you would like to congure,
and then click the Add button to congure your desired IP settings (Static/DHCP).

Instruction Manual

6

To add a virtual COM port, please use the VCOM Wizard and follow the steps.

Using the Logging Feature

To use the device server’s Logging Feature within the DS-Tool, follow the steps below:

1. In the navigation menu on the left side of the window, under Device List, click the
IP address for the applicable connected device.

2. To use the current machine for logging, under System Log Settings, click Using
Current Host’s Log Server.

3. In the navigation menu on the left side of the window, click System Log.

Instruction Manual

7

4. The log data is displayed in the DS-Tool, under Log Message.

Instruction Manual

8

Specications

Interface Serial

Ports 1

Supported Protocols

IICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP,

DNS, SNMP MIB II, HTTPS, SSH

Connectors

1x DB-9 male,

2x RJ-45

1x DC Power

1x 3pin Terminal Block

LED Indicator(s) 2x Ethernet Link, PWR1,PWR2, Serial

Supported Serial Protocols RS232/422/485

Ethernet Link Speed 10/100 Mbps

Maximum Baud Rate 460.8 Kbps

Power Input

Terminal Block: 12 ~ 48VDC in 3-pin

12 ~ 48VDC, center positive, power jack

plug

Enclosure Material Metal

Operating Temperature -40 to 70°C (-40 to 158°F)

Storage Temperature -40 to 85°C (-40 to 185°F)

Humidity 5% to 95% Non-condensing

Dimensions 124mm x 73mm x 30mm

Weight 327 g

Compatible Operating Systems

Windows® 8 (32/64bit), 7 (32/64),

Vista(32/64), XP(32/64), 2000,Windows®

Server 2012, 2008 R2, 2003(32/64)

Instruction Manual

9

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a ve-year warranty.

In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.