StarTech.com MCM110ST2PGB User Manual
Instruction Manual
10/100 MM Fiber to Ethernet Media Converter SC/ST with PoE
MCM110SC2P / MCM110SC2PGB
MCM110ST2P / MCM110ST2PGB
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Fiber to Ethernet Media Converter
• 1 x Power Adapter (MCM110SC2P and MCM110ST2P only)
• 1 x Instruction Manual
System Requirements
• 10/100Base compatible network
• For PoE operation: 802.3af compliant PSE (Power
Sourcing Equipment)
Installation
1. Connect the Ethernet cable to the Fiber Media Converter
“LAN” port.
2. Connect the other end of the Ethernet cable to the router/
switch/computer NIC. If connecting the media converter to
a 802.3af compliant PSE, skip Step 3.
3. Optional (Non-PoE operation): Plug a power adapter into
the media converter, and into an available AC power outlet.
4. Connect the ber cable into the ber receptacle on the
media converter.
5. Connect the other end of the ber cable into the router/
switch/computer NIC/another media converter. Remember
to reverse the TX and RX leads between the two devices.
*actual product may vary from photos
LED Indicators
LED Function State Status
PWR
FX Link/Act
POE
100 Mode
Full Duplex Mode
TX Link/Act
Power
Indicator
Fiber Link/
Activity
Power over
Ethernet
Ethernet Link/
Activity
ON
OFF
ON Fiber Link on
OFF No Link Detected
Flashing Receiving Data
ON
OFF
ON 100Mbps
OFF 10Mbps
ON Full Duplex Mode
OFF
ON
OFF No Link Detected
Flashing Receiving Data
Converter has
Power
Converter has no
Power
PoE mode
enabled
PoE mode not
enabled
Half Duplex
Mode
Ethernet link
Detected
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 04/23/2012
Specications
MCM110SC2P / MCM110SC2PGB MCM110ST2P / MCM110ST2PGB
Connectors
LEDs
1 x RJ45 Ethernet
2 x SC Fiber
1 x power connector
Power
Fiber Link/Activity
Ethernet Link/Activity
10/100
Full/Half Duplex
PoE
1x RJ45 Ethernet
2x ST Fiber
1x Power Connector
Power
Fiber Link/Activity
Ethernet Link/Activity
10/100
Full/Half Duplex
PoE
Fiber Type Multi-Mode Multi-Mode
Maximum Distance 2 km 2 km
Transmission Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
l00BASE-FX
IEEE802.3af PoE PD (Class 3)
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
100BASE-FX
IEEE802.3af PoE PD (Class 3)
Duplex Modes Full/Half Duplex Ethernet mode Full/Half Duplex Ethernet mode
Dimensions 73.0mm x 23.0mm x 10.8mm 73.0mm x 23.0mm x 10.8mm
Weight 170 g 170g
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur
these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the
third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...