1 Port Industrial USB to RS232 Serial
Adapter with 5KV Isolation and 15KV ESD
ICUSB232IS
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 03/14/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Product Overview ..................................................................................1
Front View ....................................................................................................................................................1
Rear View ...................................................................................................................................................... 1
RS232 Pinout ............................................................................................................................................... 1
Introduction ............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements .............................................................................................................................. 2
Installation ..............................................................................................3
DIN Rail Bracket Installation .................................................................................................................. 3
Driver Installation ...................................................................................................................................... 4
Verifying Installation ................................................................................................................................ 6
Specications ..........................................................................................8
Technical Support ..................................................................................9
Warranty Information ............................................................................9
Instruction Manual
i
Product Overview
Front View
Rear View
USB Mini-B
(5 pin) Female
DB-9 (9 pin;
D-Sub) Male
RS232 Pinout
Instruction Manual
Pin 1 DCD Pin 6 DSR
Pin 2 RXD Pin 7 RTS
Pin 3 TXD Pin 8 C TS
Pin 4 DTR Pin 9 RI
Pin 5 GND
1
Introduction
Add a galvanically isolated RS232 serial port with ESD protection through a USB
port - DIN Rail Mountable
Packaging Contents
• 1x USB to Serial Adapter
• 1x DIN Rail Bracket
• 1x 1m (3ft) USB Cable
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• Available USB Port
• Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), CE(4.2, 5.2), Windows®
Server 2008 R2, 2003(32/64), Mac OS 10.x (Tested up to 10.9), Linux 2.6.x - 3.9.x
Instruction Manual
2
Installation
DIN Rail Bracket Installation
If you are mounting the ICUSB232IS product onto a DIN Rail, you will rst need to
attach the included DIN Rail Bracket to the device. Note that the spring clip portion of
the bracket should be at the bottom.
1. Hold the ICUSB232IS device with the USB port facing down and place the DIN rail
bracket on the back of the device, lining up the screw holes.
2. Insert the 2 included screws and tighten.
Spring
Clip
Instruction Manual
3
Driver Installation
Windows
1. Upon starting Windows, if the Found New Hardware wizard appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select
Device Manager).
3. Expand the Universal Serial Bus Controllers section and right-click on the newly
detected “USB Serial Converter” device
4. Select Update Driver Software, which will start the Update Driver Software Wizard.
5. On the How do you want to search for driver software? window, click Browse my
computer for driver software.
6. Click the Browse button, and navigate to your CD/DVD drive, then to the “Win XP
Vista Win 7 8” folder.
7. Select the appropriate 32 (i386) or 64-bit (amd64) OS folder for the system you are
using and click Next to install the drivers.
8. Repeat steps 4-7 for the “USB Serial Port” device located in the Other
Devices section.
Instruction Manual
4
Mac OS
1. Connect the USB Serial Adapter to an available USB port.
2. Insert the provided CD into your DVD/CD-ROM drive.
3. Browse to the Mac OS folder on the disc.
4. Mount the FTDIUSBSerialDriver_v2_2_18.dmg le, and then run the
FTDIUSBSerialDriver.pkg application le that is appropriate for the version of Mac
OS you are running to start the install.
5. Follow the on-screen instructions to complete the installation.
NOTE: You may be prompted to restart once the install completes.
Instruction Manual
5
Verifying Installation
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the
left window panel (For Windows 8, open the Control Panel and select Device
Manager).
2. Expand the Ports (COM & LPT), and Universal Serial Bus Controllers sections. On a
successful install, you should see 1 Atil USB Serial Port (COMx) device under the Ports
(COM & LPT) section, and 1 USB Serial Converter device under Universal Serial Bus
Controllers with no exclamation points or question marks.
Instruction Manual
6
Mac OS
1. Open the System Proler by clicking the Apple symbol in the top left corner,
selecting About this Mac, then select System Report
2. Expand the “Hardware” section and click “USB” in the left column. With the adapter
connected, you should see the following device in the list.
Instruction Manual
7
Specications
Host Interface USB 2.0
Chipset ID FTDI - FT232RL
External Connectors
Supported Protocols RS-232
Maximum Baud Rate 921.6 Kbps
Data Bits 7, 8
Parity Even, Odd, Mark, Space, None
Stop Bits 1, 2
Isolation 5KV
ESD Protection 15KV
Operating Temperature -30°C to 75°C (-22°F to 167°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Humidity 5~95% RH (Non-Condensing)
Dimensions 42 x 93 x 22mm
Weight 25g
Compatible Operating Systems
1x DB-9 (9 pin; D-Sub) Male
1x USB Mini-B (5 pin) Female
Windows® 8 (32/64bit), 7 (32/64), Vista
(32/64), XP (32/64), CE (4.2, 5.2)
Windows® Server 2008 R2, 2003(32/64)
Mac OS 10.x (Tested up to 10.9)
Linux 2.6.x - 3.9.x
Instruction Manual
8
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
9
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...