HDMI® to Composite Converter with Audio
HD2VID
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 09/15/2011
*actual product may vary from photos
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any
direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ........................................................................................................ 1
Packaging Contents ......................................................................................................................................................1
System Requirements ................................................................................................................................................... 1
Front View .........................................................................................................................................................................2
Rear View ........................................................................................................................................................................... 2
Top View ............................................................................................................................................................................3
Installation .......................................................................................................... 4
Hardware Installation ...................................................................................................................................................4
Driver Installation ...........................................................................................................................................................4
Specications ...................................................................................................... 5
Technical Support .............................................................................................. 6
Warranty Information ........................................................................................ 6
Instruction Manual
i
Introduction
The HD2VID HDMI® to Composite Video Converter with Audio converts a digital HDMI
video source with supporting audio to work with analog Composite video televisions
and displays in both NTSC and PAL systems.
The HDMI to Composite converter provides features designed to ensure the highest
quality output image such as 3D noise reduction, frame rate conversion and adaptive
contrast enhancement, while an easy to use On-Screen Display(OSD) allows you to
monitor your display status. Support for a wide range of HDTV and PC input resolutions
make this versatile HDMI converter a perfect solution for using newer devices with
existing legacy displays.
Packaging Contents
• 1 x HDMI® to Composite Video Converter
• 1 x Universal Power Adapter
• 4 x Power Adapter Plug (NA/UK/EU/AUS)
• 1 x Instruction Manual
System Requirements
• HDMI enabled video source (i.e. PVR/DVR, BD Player, etc.)
• Composite video enabled display device (i.e. monitor, projector, HDTV, etc.)
• Available AC electrical outlet
• HDMI type A cable
• RCA Composite video cable
• OPITONAL: RCA Stereo audio cable
Instruction Manual
1
Front View
Rear View
Instruction Manual
2
Top View
Instruction Manual
3
Installation
Hardware Installation
1. Make sure all devices and components are powered o before attempting to install
the video converter.
2. Connect the video source to the input side of the video converter using a standard
HDMI cable (not included).
3. Connect the display device to the video converter using a male/male RCA composite
video cable (not included).
4. If audio is being used over HDMI, connect RCA Stereo audio cables from the video
converter to the speakers/audio receiver.
5. Plug the power adapter into the video converter. The Power indicator LED will light
up steady.
6. Power on the composite video display device.
7. Power on the HDMI video source.
8. Press the “NTSC/PAL” button on the top of the video converter to bring up the onscreen display (OSD). This will display the input and output signals. Pressing the
button again while the OSD is visible, will toggle output between NTSC and PAL
video modes.
Press and hold the NTSC/PAL button for 3 seconds to toggle between underscan and
overscan video output. This will shrink/stretch the image to t your display better.
Driver Installation
The video converter is an external hardware converter, so no driver or software
installation is required.
Instruction Manual
4
Specications
Video Signal Input
Video Signal Output Composite video
Connectors
LEDs 1 x Power
Supported Video Systems NTSC, PAL
Supported Video
Resolutions (Input)
Supported Video
Resolutions (Output)
HDCP Support Yes (v1.1)
Supported Audio LPCM 2-Ch, 48KHz
Enclosure Material Plastic
Power Adapter 5V DC, 1000mA, center positive, type M plug
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 20% ~ 90% RH
Dimensions (LxWxH) 65.0mm x 114.0mm x 26.0mm
Weight 120g
PC: 1280x800, 1280x768, 1224x768, 800x600,
Standard HDMI (1.2)
DVI 1.0
1 x HDMI type A female
1 x RCA Composite Video female
2 x RCA Stereo Audio female
1 x DC Power
HD: 720p, 576p, 480p @ 60Hz
640x480 @ 60Hz
480i, 576p
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online
tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and
workmanship for the periods noted, following the initial date of purchase. During
this period, the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct or
indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,
loss of business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product. Some states do not allow the
exclusion or limitation of incidental or consequential damages. If such laws apply,
the limitations or exclusions contained in this statement may not apply to you.
Instruction Manual
6
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that
bridge the old and new — we can help you nd the parts that connect
your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever
they need to go. Just talk to one of our tech advisors or visit our website.
You’ll be connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com
products and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Loading...