StarTech.com FANK8AM2 Instruction Manual
Instruction Manual
92x25mm AMD Ball Bearing CPU Cooler
Fan w/ TX3 Connector
FANK8AM2
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
*actual product may vary from photos
• Heatsink and Fan
• Instruction Manual
• Thermal Compound
Specications
Fan Dimensions 70 x 70 x 10 mm
Heatsink Dimensions 107 x 71.8 x 25.5 mm
Bearing Type Dual Ball Bearing
Heatsink Base Material Copper
Fan Material Plastic
Rated Voltage 12 V
Noise Level <36 dB
Air Flow Rate 25.63 CFM
Connector Types 1 x TX3 Female
Designed for AMD Socket AM2 series,
typically found in Server class systems
with 1U low prole design:
AMD Opteron 1210HE - 1218 HE(to
65w)
Best Fit Applications
AMD Sempron 2800+ - 3800+(to 62w)
AMD Sempron LE1100 - LE1250(to
45w)
Athlon 64 3000+ - 4000+(to 65w)
Athlon 64 LE1600 - LE1620(to 62w)
Athlon 64 x2 3600+ - 5200+(to 65w)
Athlon X2 BE2300 -BE2400(to 45w)
Installation
1. From the underside of the motherboard, position the Fastening
Plate under the CPU position such that the four screw posts are
inserted through the holes on the motherboard.
2. From the topside of the motherboard, apply Thermal Heatsink
Grease evenly to the surface of the CPU. Only apply as much
grease as will be required to cover the surface of the CPU once
the heatsink has been installed, as the pressure of the heatsink
application will spread the grease.
3. Place the heatsink and fan over the CPU, aligning the four holes
on the heatsink with the screw posts (see step #1).
4. Secure the heatsink and fan to the Fastening Plate, using the four
spring screws.
5. Connect the 3-pin (TX3) connector (on the fan) to the appropriate
connector on the motherboard.
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 03/02/2012
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...