Gigabit Single Mode Media Converter (LC - 40km)
StarTech ID: ET1000SM40LC
Do you need to bridge networks over a high-speed fiber optic backbone? The ET1000SM40LC is a
single-mode media converter that allows you to convert 1000Base-LX fiber optic signals into
Gigabit Ethernet at distances up to 40 km (25 miles). Operating at full Gigabit speeds end-to-end, this
media converter is the perfect way to create a high speed network.
Applications and Solutions
> Converts 1000Base-LX fiber optic signals to 1000Base-T Ethernet over single mode cable
Features
> Advanced features: Link-loss forwarding, loop-back test, remote monitor status, two frame
lengths
> Cost-effective way to extend/bridge networks using fiber cabling
> Easy to use and install
> Maximum Fiber Cable length of 40 Km
> Supports full or half-duplex operation
Specifications
> Color Beige
> Connector Types 2 - Fiber Optic LC Female
> Connector Types 1 - RJ45 Female
> Product Height 260
> Input Voltage 115 ~ 230 AC
> Product Length 490
> Output Current 1000 mA
> Output Voltage 12 DC
> Plug Type M
> Power Adapter Included Yes
> Center Tip Polarity Positive
> Carton Quantity 12
> Shipping (Package) Weight 1.48 lb [0.67 kg]
> Product Weight 690
> Product Width 400
> Advanced Features Link-loss forwarding, loop-back test, remote monitor status, two frame lengths
> Crossover Support Auto-detect MDI and MDIX
> Duplex Mode Support Full or Half Duplex
> Max. Data Transfer 2000 Mbits/sec. (full duplex mode)
Loading...