StarTech.com ES-200-77 User Manual
ES-200-77
Multimedia Pentium III processor-based computer for HMI Applications
User's Manual
Copyright Notice
Advantech Co., Ltd copyrights this document. All rights are reserved.
Advantech Co., Ltd. reserves the right to make improvements to the products
described in this manual at any time. Specifications are thus subject to change
without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in
any form or by any means without the prior written permission of Advantech
Co., Ltd. Information provided in this manual is intended to be accurate and
reliable. However, Advantech Co., Ltd. assumes no responsibility for its use,
not for any infringements upon the rights of third parties that may result from its
use.
All brand and product names mentioned herein are trademarks or registered
trademarks of their respective holders.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with this user manual, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to
correct the interference at his/ her own expense.
1st Edition Printed in Taiwan
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User’s Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do
not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over voltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only
by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment doesn’t work well, or you cannot get it to work according to the user’s
manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20C (-4F) OR
ABOVE 60C (140F). THIS MAY DAMAGE THE EQUIPMENT.
Packing List
Before installing your equipment, make sure that the following materials have been received:
• ES-200-77
• Accessory box, including:
- CD kit for ES-200 Driver
- 2-wire Power cord for 1.8 Meters
- 30cm COM port cable
- 30cm VGA cable
- 30cm power cable for ES-3115/ES-3112/ES-3117 DC output
- Wall mount bracket * 2 pcs.
- Side mount for ES-3115/ES-3117 iron bracket * 4pcs.
- Side mount for ES-3112 iron plate *2pcs
If any of these items are missing or damaged, contact your distributor or sales representative
immediately.
Additional Information and Assistance
1. Visit the Advantech web sites at www.advantech.com or www.advantech.com.tw
where you can find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application software, etc.)
• A complete description of the problem
• The exact wording of any error messages
Contents
Chapter 1 Introduction............................................................................. ....1
1.1 Introduction.............................................................................................2
1.2 How to use this menu.............................................................................3
1.3 Specification ...........................................................................................4
1.4 Dimensions.............................................................................................5
Chapter 2 System Setup..............................................................................9
2.1 Introduction...........................................................................................10
2.2 Quick Tour of ES-200-77......................................................................10
2.3 Preparing for the initial use ..................................................................10
2.4 Installation Procedure...........................................................................11
Chapter 3 Using ES-200-77....................................................................16
3.1 Introduction
3.2 Hard Drive
3.3 CD-ROM Drive
3.4 PS/2 Mouse and Keyboard
3.5 PCI Bus Expansion
3.6 Parallel Port
3.7 Serial COM Ports
3.8 VGA Port
3.9 Game Port
3.10 USB Ports
3.11 Audio Interface
3.12 Ethernet
p
Chapter 1
General Information
This cha
information on ES - 200-77
Sections
•
• How to Use
•
•
ter gives
Loading...