StarTech.com DVI2DPA User Manual
Instruction Manual
DVI to DisplayPort Adapter with Audio
DVI2DPA
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
The DVI2DPA DVI to DisplayPort Adapter (with 2-Channel Audio)
converts a DVI-D (Digital), Mini-DVI or HDMI source signal and
accompanying audio, for use with a DisplayPort monitor.
Supporting resolutions up to 1920x1200, this USB-Powered device
oers easy plug-and-play installation with both PC and Mac®
platforms, ensuring seamless operation with your DisplayPort
display to save the time and hassle of hardware upgrades.
A complete, out-of-the-package solution, this DVI DisplayPort
adapter includes all cables necessary for connecting a DVI-D video
source and accompanying audio (3.5mm stereo audio) to any
DisplayPort monitor, and can also be used with Mini DVI or Mini
HDMI sources using additional cables (sold separately).
Packaging Contents
• 1 x DVI to DisplayPort Adapter
• 1 x DisplayPort Cable
• 1 x 1 x 3.5mm Audio Cable
• 1 x USB type mini-B to USB A Cable
• 1 x Instruction Manual
System Requirements
• DVI-D enabled video source device (e.g. computer)
• Two adjacent USB ports on the video source device
• DisplayPort enabled display device (e.g. monitor)
For the most up-to-date information, please visit: www.startech.com
*actual product may vary from photos
Installation
To ensure the best results, make sure all devices are powered o
before beginning the installation.
1. Connect the DVI connector on the video converter directly to a
DVI-D enabled video source (i.e. computer).
2. Connect the USB cable from the video converter to two adjacent
USB ports on the video source device. NOTE: Some high powered
USB ports can power the adapter with a single USB port, however
having both connectors plugged in is recommended.
3. OPTIONAL: If using audio, connect a 3.5mm audio cable from the
sound card to the video converter.
4. Connect a DisplayPort cable (sold separately) from the DisplayPort
connector on the video converter, to the external display
(i.e. monitor).
5. Power on the display.
6. Power on the video source.
Manual Revision: 02/26/2013
Specications
Video Signal
DisplayPort 1.1a
DVI-D (DDWG 1.0)
1 x DVI-D (25-pin) male
External Connectors
1 x DisplayPort female
1 x USB mini-B female
1 x 3.5mm Audio female
LEDs 1 x Power
Maximum Video
Resolution
1920x1200
Audio Support Yes (2-channel)
EDID Support Yes
Power Adapter USB powered
Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)
Storage Temperature -10°C ~ 80°C (14°F ~ 176°F)
Humidity 10% ~ 85% RH
Integrated Cable Length 61cm / 2ft
Dimensions (LxWxH) 76.2mm x 63.5mm x 6.6mm
Weight 200g
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...