IInnssttaallllaattiioonn
Installing the Audio Receiver
Prior to making the necessary connections, please ensure that the Audio Receiver is
situated near a power outlet, as well as the speakers that will be used to broadcast the
audio signal.
1. Connect the power adapter provided, to an available power receptacle.
2. Connect the remaining end of the power adapter to the port marked DC +9V, located
on the back of the Receiver unit.
3. Insert the 3.5mm connector from the audio cable provided, into the port marked
AUDIO OUT, located on the back of the Receiver unit.
4. Insert the remaining ends (RCA Audio connectors) into the audio receiver that will be
used.
5. Begin playback of the audio signal, to ensure proper transmission. If there is any loss
of quality, please click on the Channel Select button, until the desired sound quality
has been achieved.
SSppeecciiffiiccaattiioonnss
Instruction Manual
2
Adjacent Channel Rejection >45dB @ +/- 5
MHz offset Channel Frequency 2410~2473 MHz
Channels Supported 8
Dynamic Range 45 dB (min.)
Frequency Stability +/- 100 KHz
Image Rejection >25dB @ the image frequency
Operating Frequency 2.4 GHz
Output Impedance < 1 KOhm (receiver)
Power Consumption 130 mA (receiver)
Range 100 ft. (30m) open air, 30 ft. (10m) between walls
Receiver Sensitivty -85 ddBm (min.)
Response 20 KHz, -2dB (max.)
Separation 45 dB (min.)
THD 0.6% (min.)