StarTech.com 25S22M2NGFFR User Manual

Page 1
Manual Revision: 10/13/2015
For the latest information, technical specications, and support for this product, please visit www.startech.com/25S22M2NGFFR.
DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com
25S22M2NGFFR
Dual M.2 NGFF SATA RAID Adapter
*actual product may vary from photos
Page 2
Quick start guide
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Page 3
Quick start guide
i
Table of Contents
Introduction ............................................................................................ 1
Packaging contents .................................................................................................................................. 1
System requirements ............................................................................................................................... 1
Product diagram ....................................................................................2
Install the 25S22M2NGFFR ...................................................................3
Prepare a drive for use ............................................................................................................................. 4
About RAID congurations ...................................................................5
Set a RAID mode ........................................................................................................................................ 5
About the LED indicators ......................................................................6
Technical support ...................................................................................7
Warranty information ............................................................................7
Page 4
Quick start guide
1
Introduction
Use the 25S22M2NGFFR to install two M.2 NGFF SSDs into a 2.5 in. bay to create high­performance storage with congurable RAID. This M.2 NGFF RAID adapter enables a user to install 2 M.2 NGFF SSD into a 2.5” bay and congure the drives into 0, 1, Spanning, or JBOD RAID modes.
Packaging contents
• 1 x dual M.2 NGFF SATA RAID adapter
• 2 x M.2 drive mount hardware
• 4 x screws
• 1 x mini screwdriver
• 1 x quick start guide
System requirements
• 1 or 2 M.2 NGFF drives
• SATA host device
Operating system requirements are subject to change. For the latest requirements, please visit www.startech.com/25S22M2NGFFR.
Page 5
Quick start guide
2
Product diagram
Drive 1 Error LED
Drive 2 Error LED
M.2 NGFF
Key B
RAID switches
Drive mount hardware
Drive installation holes (8 total)
RAID set button
Page 6
Quick start guide
3
Install the 25S22M2NGFFR
Warning! Drives and storage enclosures should be handled carefully, especially when they’re transported. If you’re not careful with your drives, you may lose data as a result. Always handle storage devices with caution. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti­static strap isn’t available, touch a large grounded metal surface for several seconds to discharge any built-up static electricity.
1. Remove the back from the adapter.
2. Depending on the length of your drive, you may need to move the preinstalled M.2 drive mount hardware. Place your drive next to the adapter and note the drive installation holes that match the height of your drive. If the drive mount hardware is already installed in the correct position, proceed to step 7.
3. Remove the circuit board (held in by snaps) and use a small set of pliers to remove the nuts that are holding the drive mount hardware in place on the reverse side.
4. Use the provided screwdriver to remove the two screws that make up the drive mount hardware.
5. Place the screws that you removed in step 4 in the drive installation holes that match the length of your drive and use the screwdriver to tighten the screws.
6. Replace the nuts that you removed in step 3 and tighten them.
7. Gently slide the M.2 connector on your drive into the corresponding connector on the 25S22M2NGFFR, and press the drive down toward the adapter until the drive is in place.
Note: The connector on your drive is keyed so that it only ts one way.
8. If necessary, insert a second drive.
9. Install the adapter in your 2.5 in. SATA drive application. For more information on how to install the adapter, consult the documentation that came with your SATA host device.
To remove a drive, remove the screws that are holding the drive in place and the drive will lift up and you can grasp it and remove it.
Page 7
Quick start guide
4
Prepare a drive for use
If you install a drive that already has data on it, after you plug in the drive, it appears under My Computer or Computer with a drive letter assigned to it.
If you install a brand-new drive that doesn’t contain any data, you must prepare the drive for use.
If you use a computer that’s running a version of Windows®, do the following:
1. On the taskbar, click the Windows icon.
2. In the Search eld, type disk management.
3. In the search results, click Disk Management.
4. A dialog window appears and asks you to initialize the drive. Depending on the version of Windows that you’re running, you have the option to create either an
MBR or a GPT disk.
Note: GPT (GUID partition) is required for drives larger than 2 TB but GPT isn’t
compatible with some earlier versions of operating systems. MBR is supported by both earlier and later versions of operating systems.
5. Locate the disk that is labeled Unallocated. To conrm that the drive is the correct one, check the drive capacity.
6. Right-click the section of the window that says Unallocated and click New Partition.
7. To initialize the drive in the format of your choice, complete the on-screen instructions.
When the drive is successfully installed, it appears under My Computer or Computer with a drive letter assigned to it.
Page 8
Quick start guide
5
About RAID congurations
You can set one of four RAID congurations, including RAID 0, RAID 1, JBOD, and SPAN modes.
Use the RAID switches and the table below to set your desired RAID conguration.
RAID mode Description J4 J5 J6
RAID 0 Striping - Improves system performance ON ON 1
RAID 1 Mirror - Creates a redundant drive on
the second drive for security
ON 1 ON
SPAN Creates a large single drive volume,
consisting of both drives
ON ON ON
JBOD Just a Bunch of Disks - Allows access to
both drives individually
ON 1 1
Set a RAID mode
Warning! Setting or changing your RAID conguration will erase the data or metadata
on your existing drives. Save or back up any important data before you proceed.
Note: In order to congure your device to RAID 0 or RAID 1, your device must be congured to JBOD.
1. Set the RAID switches to either 1 or ON, depending on the conguration that you want to set.
2. Connect the adapter to your SATA host device. Refer to the documentation that came with your SATA host device for more information about how to connect your adapter.
3. Power up the adapter.
4. Press the RAID set button on the adapter.
Page 9
Quick start guide
6
About the LED indicators
The 25S22M2NGFFR includes a status LED for each of the two drives. Consult the table below for more information about what the LED behaviors signify.
LED behavior Signicance
LED is illuminated and not blinking Indicates a drive error
LED is blinking Indicates that the drive is being rebuilt
LED is blinking and then stops Indicates that the drive is nished being
rebuilt
Page 10
Quick start guide
7
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Page 11
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...