Startech VID2HDCON2 User Manual
Composite and S-Video to HDMI Video Converter
Quick-Start Guide
Product Diagrams (VID2HDCON2)
Front View
321
Rear View
6
5 8 9
Component Function
1 Power LED Indicator
2 Composite Video LED Indicator
3 S-Video LED Indicator
4 Video Input Selection Button • Select the Source Device Video Signal
7
• Solid Red: The Universal Power Adapter is
connected and the On/O Switch is in the
On position
• Solid Red: The Universal Power Adapter is
connected, the On/O Switch is in the On
position, and the Composite Video Input
Port is selected
• Solid Red: The Universal Power Adapter
is connected, the On/O Switch is in the
On position, and the S-Video Input Port is
selected
10
11
• The “O” icon indicates the O position
5 On/O Switch
6 DC/5V Power Input Port
7 HDMI Output Port • Connect an HDMI Display Device
8 S-Video Input Port • Connect an S-Video Source Device
4
9 Composite Video Input Port
10 Right RCA Audio Input Port
11 Left RCA Audio Input Port
• The “I” icon indicates the On position
• Toggle the On/O Switch to power the
Video Converter On or O
• Connect a Power Source using the
Universal Power Adapter
• Connect a Composite Video Source
Device
• Connect an Audio Source to the Right
Audio Channel
• Connect an Audio Source to the Left
Audio Channel
Requirements
For the latest requirements, please visit www.startech.com/VID2HDCON2.
• Composite Video or S-Video Source Device x 1
• Composite Video or S-Video Cable x 1
• Audio Source x 1
• RCA Audio Cable x 1
• HDMI Display Device x 1
• HDMI Cable x 1
• Power Source x 1
Installation and Operation
1. Ensure all of the Devices are powered O.
2. Connect a Composite Video Cable to the Composite Video Input Port on the
Video Converter and to a Composite Video Source Device.
Or
Connect an S-Video Cable to the S-Video Input Port on the Video Converter and
to an S-Video Source Device.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 26, 2019 2:26 PM
3. Connect the Right (Red) and Left (White) RCA Audio Cable Connectors to the
Right and Left RCA Audio Input Ports on the Video Converter and to an Audio
Source.
Note: Ensure the colors of the Connectors and Ports match.
4. Connect an HDMI Cable to the HDMI Output Port on the Video Converter and to
an HDMI Display Device.
5. Connect the Universal Power Adapter to the DC/5V Power Port on the Video
Converter and to an available Power Source.
6. Toggle the On/O Switch to the On position.
7. Press and Release the Video Input Selection Button to match your Source Device
(Composite or S-Video Device) video signal type.
Universal Power Adapter - Power Clips
The Universal Power Adapter comes with 4 dierent Power Clips (NA/JP, UK, EU,
ANZ). By default the North American Power Clip comes installed on the Universal
Power Adapter. Follow the steps below to switch the Power Clip.
1. Press the PUSH Button, located below the Power Clip on the Universal Power
Adapter.
2. While holding the PUSH Button, slide the Power Clip upwards.
3. Locate the Power Clip that suits your application.
4. Slide the new Power Clip down into the Universal Power Adapter until you hear it
Click.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
Loading...