USB 3.0 to Dual Gigabit Ethernet
Adapter with USB Pass-Through Port
USB32000SPT
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 05/30/2013
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Front View .................................................................................................................................................... 1
Technical Support ..................................................................................5
Warranty Information ............................................................................5
Instruction Manual
i
Product Overview
Front View
USB 3.0
Rear View
RJ-45
Instruction Manual
USB 3.0
1
Introduction
Packaging Contents
• 1 x USB 3.0 Dual Network Adapter
• 1 x Driver CD
• 1 x Instruction Manual
System Requirements
• Available USB port
• Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2008 R2,
2003(32/64), Mac OS 10.6 - 10.8, Linux kernel 2.6.14 ~ 3.5.0
Installation
Driver Installation
NOTE: The drivers for the USB Hub will be automatically installed by the host
computer’s operating system. Only the driver for the Ethernet port needs to
be installed.
Windows / Mac
1. Insert the provided CD into your DVD/CD-ROM drive.
2. Open the contents of your CD/DVD drive and browse to x:\LAN\AX88179\ (where x:
is your CD/DVD drive letter), then select the appropriate folder for your
operating system.
3. For a Windows install, run the “AX88179_Setup.exe” application to launch the driver
installation (For Mac OS, run the “AX88179_178A_v1.3.0.pkg” application).
4. Follow the on-screen instructions to complete the install.
NOTE: You may be prompted to restart at the end of the install
Hardware Installation
5. Connect the USB 3.0 Dual Network Adapter to an available USB port.
NOTE: If connected to a USB 2.0 host port, the pass-through port will only operate
at USB 2.0 speeds and network performance may be limited.
6. The host computer’s operating system should detect the hub immediately and
automatically install the USB drivers.
7. Once installation is complete, USB 1.x/2.0/3.0 devices should be able to be
connected to the hub and recognized.
Instruction Manual
2
Verifying Installation
Windows
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select Device Manager).
2. Expand the “Network adapters” section. On a successful install, you should see the
following devices installed with no exclamation points or question marks.
Mac OS
1. Open the System Proler by clicking the Apple symbol in the top left corner,
selecting About this Mac, then select System Report
2. Expand the “Network” section. With the adapter connected, you should see the
following devices in the list.
Instruction Manual
3
Specications
Host InterfaceUSB 3.0
Chipset
Connectors
LED Indicators
Maximum Data Transfer Rate
Supported Standards
Supported Network Link Speeds10/ 100/ 1000 Mbps
Ethernet Full Duplex SupportYes
Auto MDIXYes
PowerUSB-Powered
Enclosure MaterialPlastic
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 60°C (-4°F to 140°F)
Dimensions263 x 87 x 34 mm
Humidity5~85% RH
Weight50g
Compatible Operating Systems
Windows® Server 2008 R2, 2003(32/64)
ASIX - AX88179 (2)
VIA - VL811
2 x RJ-45 Female
1 x USB 3.0 type A Male
1 x USB 3.0 type A Female
2x 10/100 Link/Activity (Green)
2x Gigabit Link/Activity (Amber)
USB 3.0: 5 Gbps
LAN: 2 Gbps (per port; Full-Duplex)
IEEE802.3i, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3az
Windows® 8 (32/64bit), 7 (32/64),
Vista(32/64), XP(32/64)
Mac OS 10.6 - 10.8
Linux kernel 2.6.14 ~ 3.5.0
Instruction Manual
4
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
5
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.