StarTech USB31GEVG User Manual
USB 3.0 Mini Docking Station Adapter
with Gigabit Ethernet and VGA
USB31GEVG
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 08/27/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements .............................................................................................................................. 1
Product Overview ..................................................................................1
Product Diagram ....................................................................................................................................... 1
Installation ..............................................................................................2
Driver Installation ...................................................................................................................................... 2
Hardware Installation .............................................................................................................................. 3
Verifying Installation ................................................................................................................................ 4
Multiple Adapter Installation ................................................................................................................ 5
Operation ................................................................................................5
Windows ....................................................................................................................................................... 5
Mac OS .......................................................................................................................................................... 7
Specications ..........................................................................................9
Technical Support ..................................................................................10
Warranty Information ............................................................................10
Instruction Manual
i
Introduction
Packaging Contents
• 1x USB 3.0 Mini Docking Station Adapter
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• USB enabled computer system with an available USB 3.0 port
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP SP3 (32), Mac OS® 10.6 and
up (Tested up to 10.10)
• VGA enabled display device with cables (for external monitor)
Product Overview
Product Diagram
USB 3.0 Host Cable
Instruction Manual
(attached)
VGA RJ45
1
Installation
Driver Installation
Depending on your Operating System version and whether or not you have an active
network connection, the Mini Docking Station Adapter may auto-install, or autodownload the proper drivers once connected to an available USB 3.0 port on the host
system. If the Mini Docking Station Adapter does not auto-install, follow the steps
below to complete the Driver Installation process.
Windows
1. Download the latest drivers from the www.startech.com website (recommended),
or insert the included Driver CD into your computer’s CD/DVD-ROM drive.
2. If AutoPlay is enabled, select the “Open folder to view les” option when the dialog
appears.
3. If AutoPlay is disabled, browse to your CD/DVD drive location, or to the downloaded
driver le location and open DisplayLink “.exe” install application, located in the
“Windows” folder to start the installation process.\
4. Follow any on-screen instructions to complete the software installation.
Note: You may be prompted to restart your system.
Instruction Manual
2
Loading...