StarTech USB 3.0 Extender (2x5Gbps) Manual [EN]

2-Port USB 3.2 Gen 1 Extender Over Multimode Fiber - 5Gbps - Up to 350m
Quick-Start Guide
Product Diagram (F35023-USB-EXTENDER)
Transmitter
Front Back
1
Component Function
2 SFP Fiber Slot
3 Link LED
4 Power LED
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
• Used to connect the USB Extender Over Fiber to a Host Computer
• USB 3.2 Gen 1 (5 Gbps)
• Backward compatible with USB 2.0 and 1.1
Multimode LC connector
• For ber cable up to 1148 ft (350 m)
Note: Not to be used with network equipment
• Indicates if the Link is established between Transmitter and Receiver
• Solid blue = Link
• O = No Link
• Indicates if the Host Computer is supplying power
• Solid blue = Power
• O = No Power
2
Receiver
Front Back
4
1
3
4
Component Function
1 2x USB-A Peripheral Ports
2 SFP Fiber Slot
• Connect USB-A Peripheral devices
• USB 3.2 Gen 1 (5 Gbps)
• Backward compatible with USB 2.0 and 1.1
• Supports up to 5 V and 0.9 A (4.5 W)
Multimode LC connector
• For ber cable up to 1148 ft (350 m)
2
Note: Not to be used with network equipment
• Indicates if the Link is established between
3 Link LED
4 DC Power Port
5 Power LED
Transmitter and Receiver
• Solid blue = Link
• O = No Link
• Connect the USB Extender Over Fiber to a Power Source using the included Power Adapter (5 V and 3 A)
• Indicates if the included Power Adapter is supplying power
• Solid blue = Power
• O = No Power
3 5
*Product may vary from image
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 6, 2022 2:57 PM
Package Contents
• Local Extender x 1
• Remote Extender x 1
• USB Type A to USB Micro B Cable For Host Connection x 1
• Power Adapter x 1
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations of conformance, please visit: www.StarTech.com/F35023-USB-EXTENDER
• Computer with a USB-A Port
• USB peripheral device with required USB-A cables
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood
before using this product.
Never operate this product if parts are missing or damaged.
Installation
Transmitter (Local Extender)
1. Connect the USB Micro B Host Port to a USB-A Port on the Host Computer, using the included USB Type A to USB Micro B Cable.
No drivers are needed for the USB Extender Over Fiber.
2. Connect a LC to LC Multimode Fiber Cable to the SFP Fiber Slot located on the Transmitter.
Receiver (Remote Extender)
1. Connect the other side of the LC to LC Multimode Fiber Cable (connected to the Transmitter) to the SFP Fiber Slot, located on the Receiver.
2. Connect the included Power Adapter to an Electrical Outlet and into the DC Power Port of the Receiver.
3. Connect a USB Peripheral Device to any of the two USB-A Peripheral Ports on the Receiver.
Some USB peripheral devices may need drivers to nish their installation.
The ber cable should not go through any networking equipment (e.g. router, switch, etc.).
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third­party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Regulatory Compliance FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
StarTech.com Ltd.
45 Artisans Cres London, Ontario N5V 5E9 Canada
StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW
StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands
FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp
Loading...