Startech USB2SATAIDE User Manual

USB 2.0 to IDE or SATA Adapter Cable

USB2SATAIDE

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 04/19/2011

*actual product may vary from photo

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names
and/or symbols of third-party companies not related in any way to StarTech.com. Where they
occur these references are for illustrative purposes only and do not represent an endorsement of
a product or service by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks,
registered trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.

Instruction Manual

Table of Contents

Introduction .................................................................................... 1

Packaging Contents ..........................................................................................................................1

System Requirements.......................................................................................................................1

Hard Drive Adapter............................................................................................................................2

Power Adapter ....................................................................................................................................2

Installation ...................................................................................... 3

Hardware Installation .......................................................................................................................3

Driver Installation ...............................................................................................................................6

Specications .................................................................................. 7

Technical Support .......................................................................... 8

Warranty Information .................................................................... 8

Instruction Manual

i

Introduction

Thank you for purchasing a StarTech.com USB 2.0 to IDE or SATA Adapter Cable. Now,
you will be able to copy, backup, or transfer large amounts of data from one drive to
another, while taking advantage of USB2SATAIDE’s convenient Plug and Play design.
Plus, this product oers a convenient way to externally test hard drives for function.

Packaging Contents

• 1 x USB to SATA/IDE Adapter

• 1 x Universal Power Supply

• 3 x Power Cord (NA/UK/EU)

• 1 x Instruction Manual

System Requirements

• Available USB 2.0 port

• Available AC electrical outlet

• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple® Mac® OS 9.x/10, or Linux®

Instruction Manual

1