Startech UNIRAILS1UB User Manual
4-Post 1U Universal Adjustable Mounting Depth Rack Rail
Quick-Start Guide
Product Diagram (UNIRAILS1UB)
1
2
Component Function
Adjustable Depth Basic 1U
1
Universal Server Rail
2 Front Bracket
3 Back Bracket
• Used to securely mount equipment (1U in
height) in a Server Rack.
• Maximum Weight Capacity = 200 lb. (91.7 kg)
• Used to secure the Server Rail to a Server
Rack.
• Used to secure the Server Rail to a Server
Rack.
Requirements
For the latest requirements, please visit www.startech.com/UNIRAILS1UB
• Cage Nut Tool x 1 (Optional)
• Phillips Head Screwdriver x 1
Package Contents
• Adjustable Depth Basic 1U Universal Server Rail x 2
3
• M6-12 Screws x 8
• Cage Nuts x 8
• M6 Plastic Cap Washers x 8
• Quick-Start Guide x 1
Installing the Server Rail
1. Insert the Cage Nuts x 4 into the Cage Nut Holes on the front and back Rails of the
Server Rack.
Note: You can use a Cage Nut Tool to aid in the installation of the Cage Nuts.
2. Align the Screw Hole on the Back Bracket on the Server Rail with the Cage Nuts
(inserted in step 1) on the back Rail on the Server Rack.
3. Slide an M6 Plastic Cap Washer over-top of the M6-12 Screw.
4. Insert an M6-12 Screw through the Server Rail Screw Hole and into the Cage Nut.
5. Insert a second M6-12 Screw through the bottom Washer and Server Rail Screw
Hole and into the Cage Nut.
6. Using a Phillips Head Screwdriver tighten the M6-12 Screws, being careful not to
over-tighten.
7. Align the Screw Hole on the Front Bracket on the Server Rail with the Cage Nuts
(inserted in step 1) on the front Rail on the Server Rack.
8. Slide an M6 Plastic Cap Washer over-top of the M6-12 Screw.
9. Insert an M6-12 Screw through the Server Rail Screw Hole and into the Cage Nut.
10. Insert a second M6-12 Screw through the bottom Washer and Server Rail Screw
Hole and into the Cage Nut.
11. Using a Phillips Head Screwdriver tighten the M6-12 Screws, being careful not to
over-tighten.
12. Repeat Steps 1 - 11 to install the second Server Rail.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: August 23, 2019 10:33 AM
Product Size
Position Measurement
Closed 609 mm (24“)
Extended 932 mm (36”)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
Loading...