Page 1
Dual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter - PoE/PSE
StarTech ID: ST2000PEXPSE
The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to
25.5W of power each, combining a network data connection and power on a single cable, for less clutter and
convenient installations in remote locations.
This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing
Equipment (PSE) device, and can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the
need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and
wireless access points.
Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports
features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL).
The ST2000PEXPSE PoE NIC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Applications
Provide power to PoE powered devices, where they have no access to a power source
Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot
Connect to 2 separate networks simultaneously
Install dual networking capabilities into a small form factor or other space-constrained computer system
Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points
Page 2
Features
Dual 10/100/1000 Mbps PoE RJ45 ports
Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard
Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port
Built-in SATA and LP4 Molex power connector
Unique surge protection design helps prevent system damage in the event of lightning strikes
Jumbo Frame support
On-chip 48 KB Big Transmit/Receive Buffer Support
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging,
IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
Crossover Detection & Auto-Correction (Auto MDIX)
Includes full and low profile/half-height installation brackets
Page 3
Technical Specifications
Warranty 2 Years
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID Realtek RTL8111E
Industry Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at
Interface RJ45 (Gigabit Ethernet)
Port Style Integrated on Card
Ports 2
Connector Type(s) 1 - PCI Express x1 Male
External Ports 2 - RJ-45 Female
Internal Ports 1 - LP4 (4 pin; Molex Large Drive Power) Male
Internal Ports 1 - SATA Power (15 pin) Plug
Auto MDIX Yes
Buffer Size 48 KB
Compatible Networks 10/100/1000 Mbps
Full Duplex Support Yes
Maximum Data Transfer Rate 1000 Mbps (uni-directional), 2000 Mbps (bi-directional)
OS Compatibility Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, ME, 98SE
Windows Server® 2012, 2008 R2, 2003(32/64)
Linux 2.4.x and later
Product Height 2.7 in [68 mm]
Product Length 7.7 in [195 mm]
Product Weight 3.7 oz [106 g]
Product Width 0.7 in [19 mm]
LED Indicators 2 - Link/ Activity (green)
LED Indicators 2 - PoE Active (yellow)
Output Voltage 48 DC
Humidity 5% ~ 95% RH
Operating Temperature 0°C to 55°C (32°F to 131°F)
Storage Temperature -20°C to 85°C (-4°F to 185°F)
System and Cable Requirements Available full/low profile PCI Express expansion slot
System and Cable Requirements Available LP4 Molex or SATA power connector
Shipping (Package) Weight 8.6 oz [245 g]
Included in Package 1 - PCI Express Network Card
Included in Package 1 - Low Profile Bracket
Included in Package 1 - Driver CD
Included in Package 1 - Instruction Manual
Page 4
Certifications, Reports and Compatibility
Loading...