Startech ST12MHDLNHR User Manual
HDMI Over IP Extender Kit - 1080p
ST12MHDLNHK
ST12MHDLNHR
*
actual product may vary from photos
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
JP: 取扱説明書 - jp.startech.com
For the latest information, technical specications, and support for
For the most up-to-date information, please visit: www.startech.com
this product, please visit www.startech.com
Manual Revision: 06/28/2018
Manual Revision: 06/28/2018
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Instruction Manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ............................................................................................1
Package Contents ..................................................................................................................................... 1
Requirements ............................................................................................................................................. 2
Product Diagram ....................................................................................3
Transmitter Front View ............................................................................................................................3
Transmitter Rear View .............................................................................................................................. 3
Receiver Front View .................................................................................................................................. 4
Receiver Rear View .................................................................................................................................... 4
Hardware Installation and Conguration ..........................................5
Preparing Your Site ................................................................................................................................... 5
Point-to-Point Installation without a LAN Network ......................................................................5
Point-to-Multipoint Installation with a LAN Network ................................................................. 6
Matrix with a Gigabit LAN Network .................................................................................................... 7
IP Conguration ......................................................................................................................................... 8
Operation ................................................................................................10
LED Indicators............................................................................................................................................. 10
Push-Button Control ................................................................................................................................11
Infrared (IR) Blaster and Receiver Operation ................................................................................... 11
IR Remote Control ..................................................................................................................................... 12
Bandwidth Switch ..................................................................................................................................... 12
Resolution Switch ..................................................................................................................................... 12
Serial Control .............................................................................................................................................. 13
Technical support ................................................................................... 17
Warranty information ............................................................................17
Instruction Manual
Introduction
Package Contents for ST12MHDLNHK
• 1 x HDMI Over IP Transmitter
• 1 x HDMI Over IP Receiver
• 2 x Universal Power Adapters (NA, EU, UK, ANZ)
• 2 x Mounting Brackets
• 2 x CAT5 Cables
• 1 x Plastic Screwdriver
• 1 x IR Remote Control
• 2 x USB-A to Mini USB-B Cable
• 1 x DB9 to 2.5 mm Serial Adapter Cable
• 1 x IR Blaster
• 1 x IR Receiver
• 8 x Rubber Feet
• 1 x Instruction Manual
Package Contents for ST12MHDLNHR
• 1 x HDMI Over IP Receiver
• 1 x Universal Power Adapters (NA, EU, UK, ANZ)
• 1 x Mounting Bracket
• 1 x CAT5 Cable
• 1 x Plastic Screwdriver
• 1 x IR Remote Control
• 1 x USB-A to Mini USB-B Cable
• 1 x DB9 to 2.5 mm Serial Adapter Cable
• 1 x IR Receiver
• 4 x Rubber Feet
• 1 x Instruction Manual
Instruction Manual
1
Requirements
• HDMI® Enabled Video Source Device(s) (e.g. computer, Blu-ray™ player)
• HDMI Enabled Display Device(s) (e.g. television, projector) - one for each Receiver
• AC Electrical Outlet for the Transmitter and each Receiver
• HDMI Cable for Video Source(s) and Display(s)
• 10/100 or Gigabit Networking Devices (e.g. LAN hub, router or switch)
• Network Cable (CAT5/5e/6)
Instruction Manual
2
Product Diagram
Transmitter Front View
Control IR In /
Extension IR Out
Port
Transmitter Rear View
Power
Adapter
Port
Instruction Manual
Bandwidth
Switch
LAN
Port
Resolution
Switch
HDMI Video
Input Port
Function Button
Serial
(Control)
Port
3
Rotary DIP
Switch
Loading...