Startech ST122LE User Manual

ST122LE

2-Port VGA Video Splitter - 300 MHz

Installation Guide

Packaging Contents

• 1 x ST122LE video splitter

• 1 x USB to DC Power adapter cable

• 1 x Installation Guide

System Requirements

• VGA enabled video source device (i.e. computer, laptop, etc)
with an available USB port

• VGA enabled display devices (i.e. monitor, projector, TV, etc)

Installation

NOTE: Before connecting the splitter to the source computer
and displays, you should ensure that the workspace is
configured to require minimal cable between the computer and
splitter, and between the splitter and the displays.

The maximum resolution you will be able to use for your
application depends on cable quality and length, and how many
interference-causing devices are nearby. You may not be able
to use the maximum resolution at longer distances. For the best
possible performance, keep the length of cable from the source
computer to the splitter to 6 feet (1.8m).

1. Power down the host computer and displays that will be
connected.

2. Connect the Video In connector on the splitter to the Video
Out port on the host computer.

3. Using a high-quality HD-15 VGA switchbox male-to-male
cable (StarTech.com part number MXT101MMHQ), connect
one end of the cable to one of the Video Out ports on the
splitter. Connect the opposite end to the VGA input on the
display. Repeat this process for the remaining display.

4. Connect the tip on the power adapter (provided) to the power
port on the video splitter. Connect the remaining end to an
available USB port on the host computer.

Once you have completed the steps above, you can power on
the displays and the host computer. Each will now display the
image from the source computer.

Specications

Video Signal

Number of Ports

Connectors

LEDs

Maximum Video Resolution

Video Bandwidth

Maximum Cable Distance

DDC Support

Integrated Cable Length

Operating Temperature

Storage Temperature

Humidity

Dimensions

Weight

*actual product may vary from photos

VGA (RGBHV)

2

2 x DE-15 VGA female
1 x DE-15 VGA male
1 x USB type A male

1 x Power

2048 x 1536

300 MHz

65 m / 210 ft

DDC, DDC2, DDC2B (Port 1 only)

400 mm

0°C ~ 70°C (32°F ~ 158°F)

-20°C ~ 85°C (-4°F ~ 185°F)

0% ~ 95% RH

68.0mm x 46.0mm x 21.5mm

110 g

Warranty Information

This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.

Manual Revision:08/23/2010
For the most up-to-date information, please visit www.startech.com