Startech ST121SHD50 User Manual

HDMI® Over CAT5/CAT6 Extender with Power Over Cable - 165 ft (50m)

StarTech ID: ST121SHD50

The ST121SHD50 HDMI® over Cat5e/Cat6 Video Extender kit lets you extend HDMI video and audio by up to 165
feet (50 Meters) over dual Cat5e cables, or 130 feet (40 Meters) over dual Cat6 cables. For added versatility the kit
features Power Over Cable and only requires a single power adapter that can be connected to either the Transmitter
or Receiver.

With support for High-Definition resolutions of up to 1920x1080 / 1080p and the accompanying digital audio, this
cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a
convenient plug-and-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures
native resolution and maximum compatibility with your display or projector.

For added flexibility and convenience, HDMI cables up to 32ft (10m) can be connected to both the local and remote
units, which lets you extend your HDMI signal to even further distances.

The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local
transmitter and remote receiver units, along with optional hardware that lets you mount the units as needed. Plus,
with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

Extend HDMI when power outlets are limited, with only a single power adapter required at either the
Transmitter or Receiver using Power Over Cable
Place the display in a convenient viewing area, while the system equipment is placed elsewhere in a clean
and secure environment
Optimize placement of digital signage in healthcare, education, retail, and government facilities

Features

Power Over Cable allows a single power source to operate the Transmitter and Receiver
Supports Cat5e (50m) or Cat6 (40m) Ethernet cabling
No software/drivers required
Supports HD resolutions up to 1080p (1920x1080)
Includes transmitter (local) and receiver (remote) units