Startech ST121SHD30 Product Data Sheet

HDMI Over Cat5 / Cat6 Extender with IR - 100 ft (30m) Power Free

StarTech ID: ST121SHD30

The ST121SHD30 HDMI® over CAT5e/CAT6 Video Extender kit lets you extend HDMI audio/video and an IR
remote control signal by up to 100 feet (30 Meters) over dual Cat5e or Cat6 cable. For added versatility this
HDMI extender kit is powered via the HDMI bus, and does not require any additional power adapter.

With support for High-Definition resolutions of up to 1920x1080 / 1080p and the accompanying digital audio, this
cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. Plus,
because the extender kit does not require a power adapter, you can easily extend an HDMI signal in areas
where access to power outlets is limited.

The HDMI over Cat5e/Cat6 video extender kit includes both the local transmitter and remote receiver
units, perfect for point-to-point digital signage applications that require high quality HDMI video. The Extender
also works to extend Infrared IR signals from remote controls, perfect for controlling your video source from your
video destination.

For additional distance, HDMI cables up to 32-feet (10-meters) in length can be used on the local and remote
ends.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

Extend an HDMI signal to areas where access to a power outlet is limited
Place a display in a convenient viewing area, while keeping your system equipment in a clean, secured
environment
Optimize placement of digital signage in healthcare, education, retail, and government facilities

www.startech.com

1 800 265 1844

Features

Supports Cat5e and Cat6 Ethernet cabling
Power over HDMI
No software/drivers required
Supports HD resolutions up to 1080p (1920x1080)
Includes transmitter (local) and receiver (remote) units

www.startech.com

1 800 265 1844