Startech ST121HDBTD User Manual
Quick start guide
Compact HDMI® over CAT5 Transmitter - 70m
ST121HDBTD
Packaging contents
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
• 1 x HDMI transmitter
• 1 x USB cable for power
• 1 x quick start guide
System requirements
• HDMI enabled video source, such as a computer or Blu-ray™ player
• HDBase-T™ display or an HDBaseT receiver with an HDMI display
• CAT5e or CAT6 cabling with enough length to reach from your
video source to the location of your display
Product overview
Front view
HDMI
input
Rear view
RJ-45
output
About this product
HDBaseT is a standardized, zero-latency video distribution
technology that’s revolutionizing HDMI distribution. HDBaseT uses
an advanced method of modulation that enables you to distribute
uncompressed HDMI audio and video over standard network
cabling. This transmitter turns your HDMI signal into an HDBaseT
signal, enabling you to extend your source signal to an HDBaseT
display or receiver up to 70 m away.
Preparing your site
1. Setup your local HDMI enabled video source in your desired
location.
2. If you’re connecting to an HDBase-T display, setup the display
appropriately in your desired location.
or
If your connecting to an HDBase-T receiver with an HDMI
display, setup the display appropriately in your desired location
and connect your HDBaseT receiver to the display, as per the
documentation included with your HDBaseT receiver.
Notes: Please ensure that the transmitter is situated near an
available USB power source. Make sure all devices are turned o
before you begin the installation.
Micro-USB port
for power
*actual product may vary from photos
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ST121HDBTD
Manual Revision: 02/01/2016
Hardware installation
1. Position the transmitter near the video source.
2. Connect the HDMI input on the transmitter to the HDMI video
output port on your video source device.
3. Connect the included USB cable to the Micro-USB port on the
transmitter and to a nearby USB power source.
4. Connect the CAT5e or CAT6 cable to the RJ-45 output on the
transmitter and to the input port on your HDBaseT receiver or
display.
Note: This needs to be a direct connection. Do not route the cable
through any networking equipment.
5. Power up each of your devices. The image from your video source
will now appear on your remote display.
Note: The resolution performance of this extender will vary
depending on the length of your cabling. Please review the chart
below to determine the best solution for your setup. For best
results, StarTech.com recommends shielded CAT6 cable.
Distance Maximum resolution
35 m or less 4Kx2K
Up to 70 m 1080p
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...