Startech SSPMSVESA User Manual
VESA Mount Adapter for StarTech.com Docking Stations and Hubs
Quick-Start Guide
Product Diagram (SSPMSVESA)
1
Component Function
VESA Mounting
1
Bracket
2 VESA Mounting Holes
3 Mounting Holes
• Used to mount a StarTech.com Docking
Station or Hub to the back of a Monitor.
• Used to mount the Adapter to the back of a
Monitor, using the Monitor’s VESA Mounting
Pattern.
Note: VESA mounting sizes are 75x75 and
100x100.
• Used to mount a StarTech.com Docking
Station or Hub to the Adapter.
• Spacers x 4
• Quick-Start Guide x 1
Attaching a StarTech.com Docking Station or Hub
2
3
1. Align the Mounting Holes on the Adapter with the Mounting Holes on the
StarTech.com Docking Station or Hub. The recessed hole pattern should be facing
outward so the M3 x 5 mm (Countersunk) Screws will t properly.
2. Insert the four M3 x 5 mm Screws through the Mounting Holes on the Adapter
and into the Mounting Holes on the Startech.com Docking Station or Hub.
3. Using a Phillips Head Screwdriver (sold separately) tighten the M3 x 5 mm Screws,
being careful not to over-tighten the M3 x 5 mm Screws.
Mounting the Adapter (Flush)
1. Place the Monitor screen facing down on a at, clean, and secure surface.
2. Align the Mounting Holes on the Adapter with the VESA Mounting Holes on the
back of the Monitor.
3. Align the VESA Monitor Mount with the VESA Mounting Hole on the back of the
Adapter, sandwiching the Adapter between the VESA Monitor Mount and the
back of the Monitor.
4. Insert four of the M4 x 12 mm Screws through the VESA Monitor Mount and the
Adapter and into the Mounting Holes on the back of the Monitor.
5. Using a Phillips Head Screwdriver, tighten the M4 x 12 mm Screws, being careful
not to over-tighten the M4 x 12 Screws.
Requirements
For the latest requirements, please visit www.startech.com/SSPMSVESA
If you are using a Monitor Stand that covers the VESA Mounting Holes on the back of
the Monitor, a VESA compatible monitor mount will be require to use the Adapter.
Package Contents
• VESA Mounting Bracket x 1
• M3 x 5 mm Screws x 4
• M4 x 12 mm Screws x 4
• M4 x 20 mm Screws x 4
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Mounting the Adapter (Recessed)
Note: The Spacers and Screws provided with the Adapter can be installed on
monitors with VESA mounting holes with a maximum depth of 7mm.
1. Place the Monitor screen facing down on a at, clean, and secure surface.
2. Place the four Spacers over the VESA Mounting Holes on the back of the Monitor.
3. Align the Mounting Holes on the Adapter with the Spacers on the back on the
Monitor.
4. Align the VESA Monitor Mount with the VESA Mounting Hole on the back of the
Adapter, sandwiching the Adapter between the VESA Monitor Mount and the
Spacers.
Manual Revision: July 24, 2019 3:57 PM
5. Insert four of the M4 x 20 mm Screws through the VESA Monitor Mount, Adapter,
and Spacers and into the Mounting Holes on the back of the Monitor.
6. Using a Phillips Head Screwdriver, tighten the M4 x 20 mm Screws, being careful
not to over-tighten the M4 x 20 Screws.
Mounting the Adapter While Using a Monitor Stand
If you are using a monitor stand with a VESA Mounting Pattern on the back of the
Monitor, the Adapter can still be mounted to the back of the Monitor.
1. Place the Monitor screen facing down on a at, clean, and secure surface.
2. Align the Mounting Holes on the Adapter with the VESA Mounting Holes on the
back of the Monitor.
3. Insert four of the M4 x 12 mm Screws through the VESA Mounting Hole on the
Adapter and into the Mounting Holes on the back of the Monitor.
4. Using a Phillips Head Screwdriver, tighten the M4 x 12 mm Screws, being careful
not to over-tighten the M4 x 12 Screws.
Product Dimensions
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
Loading...