USB 3.0 SATA III Hard Drive Docking Station SSD /
HDD with UASP
Product ID: SDOCKU33BV
The SDOCKU33BV UASP-enabled USB 3.0 docking station makes it easy for you to connect and swap
2.5in or 3.5in SATA III hard drives (HDD) and solid state drives (SSD) through an available USB port. The
dock performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host
controller to utilize the full potential of your SATA III hard drives.
With support for large capacity SATA I/II/III drives (tested up to 4TB), and 2.5in or 3.5in drives this
HDD/SSD docking station is compatible with virtually any SATA drive, and greatly increases the
storage/backup capabilities of your computer.
Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive
Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive
dock.
To ensure compatibility with your computer system, the SDOCKU33BV supports all of the leading
operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX
(10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™.
www.startech.com
1 800 265 1844
The SDOCKU33BV is backed by a 2-year StarTech.com warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a
70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an
80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy
Bridge system, a UASP-enabled StarTech.com
Enclosure, and a SATA III solid state drive.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Add quick access to drives for data recovery or retrieval.
• Backup data quickly to an external data archiving
• Test or benchmark different hard drives and swap between them
• Quickly access drives for imaging
Features
• Supports 2.5in and 3.5in form factor SATA hard drives (HDD) and
solid state drives (SSD)
• UASP Support (Attached SCSI Protocol Specification Revision 1.0)
• Compatible with USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps)
• Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
• Plug-and-Play and Hot-Swap compatible
www.startech.com
1 800 265 1844
Warranty 2 Years
Hardware Chipset ID ASMedia - ASM1053 - 6G
Compatible Drive Types (Type and
Rate)
SATA
Drive Installation Removable
Drive Size 2.5in & 3.5in
Fan(s) No
Interface USB 3.0
Number of Drives 1
Connector(s) Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB Type-B (9 pin) USB 3.0 Female
Software Microsoft WHQL Certified Yes
OS Compatibility OS independent; No software or drivers required
Indicators LED Indicators 1 - Power/Activity
Power Input Voltage 100 ~ 240 AC
Output Voltage 12 DC
Power Source AC Adapter Included
Environmental Humidity 20%RH ~ 80%RH
Operating Temperature 5°C to 35°C (41°F to 95°F)
Storage Temperature -20°C to 50°C (-4°F to 122°F)
Physical
Characteristics
Color Black
Product Height 2 in [52 mm]
Product Length 5.5 in [139 mm]
Product Weight 24.9 oz [704 g]
Product Width 3.6 in [91 mm]
Packaging
Information
Shipping (Package) Weight 24.9 oz [704 g]
What's in the Box Included in Package 1 - USB 3.0 SATA hard drive docking station
1 - USB 3.0 Cable
1 - Universal Power Adapter (NA/EU/UK) and AU in Australia
1 - Instruction Manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...