StarTech SATRD30CM Quick Start Guide

0.3 m Round Latching SATA Cable

Quick-Start Guide

Product Diagram (SATRD30CM)

1

2

Part Function

Latching SATA

1

Connectors

2 Latch • Prevents disconnections

3 SATA Cable

• Connect a SATA Drive to a Computer

• SATA 7 pin - data only

• Color - black

• Length - 0.3 m

• Wire Gauge - 30 AWG

• Compliant with SATA 6Gb/s specications

Installation

• Connect the Latching SATA Connectors to the SATA Port on a SATA Drive and to
an available SATA Port on a Computer’s Motherboard.

Operation

Disconnecting the Latching SATA Connectors

• Press and Hold the Latch on the Latching SATA Connectors and Pull gently.

Note: If you encounter resistance when attempting to remove the Latching SATA

Connectors, reposition your nger over the Latch and try again.

3

Requirements

For the latest requirements please visit: www.startech.com/SATRD30CM.

• SATA Drive

• Computer

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 6, 2020 12:39 PM

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third­party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.

Warranty Information

This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

StarTech.com Ltd.

45 Artisans Cres
London, Ontario
N5V 5E9
Canada

StarTech.com LLP

2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom

FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com