Startech SATDUP11 User Manual

1 to 1 Standalone Hard Drive Duplicator
and Eraser

SATDUP11

*actual product may vary from photos

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 07/29/2014

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Front View ....................................................................................................................................................1

Rear View ...................................................................................................................................................... 1

Introduction ............................................................................................2

Packaging Contents ................................................................................................................................. 2

Hardware Setup ......................................................................................................................................... 3

User Menu Table of Contents ................................................................................................................ 4

Hardware Operation ..............................................................................5

1. Copy .......................................................................................................................................................... 5

2. Compare .................................................................................................................................................. 6

3. Copy & Compare ................................................................................................................................... 6

4. Erase .......................................................................................................................................................... 6

5. Utility ......................................................................................................................................................... 8

6. Setup ......................................................................................................................................................... 13

Technical Support .................................................................................. 17

Warranty Information ............................................................................17

Instruction Manual

i

Product Diagram

Front View

5

6

Rear View

1

1

1. Display Screen

2. Navigation buttons

3. OK button

4

3

2

2

4. Esc button

5. SATA HDD source port

6. SATA HDD Target port

1. Power Switch

2. Power Adapter Port

Instruction Manual

1

Introduction

Packaging Contents

• 1X – HDD Duplicator/Eraser

• 2X – SATA Cables

• 1X – Power Adapter

• 3X – Power Cords (NA, UK, EU)

• 1X – Instruction Manual

• 2X- HDD Pads

WARNING! Hard drives and storage enclosures require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a
large grounded metal surface (such as the computer case) for several seconds.

Instruction Manual

2

Hardware Setup

1. Ensure the power switch is set in the o position. Connect the included power
adapter from an available AC power outlet to the Power Adapter Port on the back of
the SATDUP11.

2. Using an included SATA Cable, attach the HDD you would like to duplicate to the
source port. (SATA port on the left identied as source, see below).

3. Using an included SATA Cable, connect the HDD you would like to have over
written, or erased to the target port. (SATA port on the right identied as source, see
below)

Note: For added protection, and heat insolation the source and target drives can be

placed on included HDD Pads.

WARNING! Any Data remaining on the target drive will be over written.

4. Press the power switch to the “On” position, the SATDUP11 is now ready to use.

Instruction Manual

3

User Menu Table of Contents

1. Copy

2. Compare

3. Copy and Compair

4. Erase 4.1 Quick Erase

5.Utility 5.1 Show HDD

6. Setup 6.1 Copy Area 6.1.1 System and Files

4.2 Full Erase

4.3 DoD Erase

4.4 Dod Erase Comp

Info

5.2 Update
System

5.3 System Info 5.4 Read Speed

6.2 Skip Error

6.3 Language

6.4 Advanced
Setup

6.5 Restore Defaults

5.1.1 Model Number

5.1.2 Version of Firmware

5.1.3 Serial Number

5.1.4 Device Power Cycle

5.1.5 Power-On Hours

5.1.6 Reallocation Event Count

5.1.7 O-Line Scan Uncorrectable

5.1.8 Seek Error Rate

5.1.9 Temperature

5.2.1 Update BIOS

5.2.2 Create Update HDD

5.5 Write Speed

6.1.2 ALL Partitions

6.1.3 Whole HDD

6.1.4 Percentage

6.4.1 Unknown Format

6.4.2 Erase Master

6.4.3 Erase Pattern

6.4.4 Wait HDD Time

6.4.5 Transfer Rate

6.4.6 Stop Motor Time

Instruction Manual

4