Startech S3510BMU33 User Manual

3.5in Black USB 3.0 External SATA III Hard Drive Enclosure with UASP for SATA 6 Gbps – Portable External HDD
Product ID: S3510BMU33
The S3510BMU33 Black USB 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard
drive (HDD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0
connection, but is backward compatible with USB 2.0/1.1 host connections as well.
Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70%
protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly
increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard
drives. See our UASP testing results below for further details.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD enclosure is
compatible with virtually any 3.5in SATA hard drive, and can greatly increase the storage/backup
capabilities of your computer.
www.startech.com
1 800 265 1844
The USB 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a
70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an
80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy
Bridge system, a UASP enabled StarTech.com
enclosure, and a SATA III solid state drive.
www.startech.com
1 800 265 1844
Loading...
+ 3 hidden pages