Startech S322M225R User Manual

Dual-Slot M.2 Drive to SATA Adapter for 2.5" Drive
Bay - RAID

Product ID: S322M225R

Boost your system performance by enhancing the capacity, speed and security of your data storage. This

two-drive M.2 to SATA adapter lets you install two M.2 SATA drives instead of a SATA platter drive, in a

single 2.5” drive bay, and increase your storage options by configuring a powerful RAID array.

Build a RAID array to enhance system performance

The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping

you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The

SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA

controller, so both drives can be used independently of one another.

www.startech.com

1 800 265 1844

Maximize file transfer speeds

The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA

SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of

up to 6Gbps.

The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of

your M.2 NGFF SSDs.

Easy installation

This open-frame adapter is easy to install as it comes with all the necessary installation hardware and

doesn’t require any extra software or drivers, to get you up and running quickly.

The S322M225R is backed by a StarTech.com 2-year warranty and free lifetime technical support.

www.startech.com

1 800 265 1844