StarTech RJ45SPLITTER User Manual

RJ45SPLITTER
Wall Outlet
Office A
Office B
Networked
Devices
RJ45SPLITTER
Ethernet Patch Panel
A company has two offices on its property. While the bulk of the staff are located in Office A, there is a need for a small number of network connections in Office B. A single Category 5 Ethernet drop connects Office B to the network. The company has decided to expand, and they want to put both a network printer and a wire­less access point in Office B. They would like to have a dedicated Ethernet connection for each device back to the switch in Office A to improve performance. It would be difficult to add another wire, since the existing cable is run through a conduit.
Solution
: The RJ45SPLITTER uses the untapped capacity in Category 5 cabling to effectively double the number of connections carried on a single cable. By using the RJ45SPLITTER at both locations, the company was able to combine two connections to the switch over the existing wiring at Office A and split the signal back into two fully operational connections at Office B, saving the hassle and expense of installing new wiring.
Legend
Combined signal (2 connec­tions) using one Cat5 cable
Standard signal (1 connection) using Cat5 cable
RJ45SPLITTER
Loading...