IP67 Certified 2T2R 2.4GHz Outdoor Wireless-N Access Point - PoE-Powered 300 Mbps 802.11b/g/n WiFi
AP
StarTech ID: R300WN22ODG
The R300WN22ODG Outdoor Wireless Access Point lets you add 2.4GHz Wireless-N network coverage to an
outdoor area, through a ruggedized industrial access point.
This outdoor access point features an IP67 certified, die-cast metal enclosure with heavy-duty cable grommets
so it can withstand the outdoor elements and offers pole and wall-mounting options. Plus, the PoE-powered AP
includes a passive Power-over-Ethernet injector, enabling you to install it in locations where a typical power
outlet is unavailable. PoE pass-through via the secondary LAN port lets you connect data and power to a PoEcapable device near the access point.
For optimal wireless coverage, the AP broadcasts a signal through a high-powered 800mW internal 10dBi 2T2R
antenna, with 802.11b/g/n compatibility to easily connect most wireless devices new or old.
The device offers support for several different operating modes (AP, WDS and WISP), which help you to create
a wireless network from a wired connection, bridge multiple APs together or extend the range of an existing
wireless network. The AP supports Wireless-N data rates up to 300Mbps with security through WEP, WPA, or
WPA2 authentication, all configurable through an easy-to-use web-based utility.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
www.startech.com/uk
0800 169 0408
Applications
Create an outdoor Wireless-N access point from an existing wired or wireless connection to eliminate
network dead spots and allow wireless devices to connect across large open spaces
Use WDS (Wireless Distribution System) to mesh multiple Access Points together
Connect smartphones, tablets or laptops to a Wireless B/G/N access point
Use the secondary LAN port to deploy remote PoE-Powered devices such as switches or IP cameras
Features
IEEE 802.11b/g/n (Wireless-N) compliant with speeds up to 300 Mbps @ 2.4GHz
Metal, IP67 certified pole and wall-mountable housing
PoE-powered access point with included PoE injector and PoE pass-through
Supports AP, WDS and WISP operating modes
800mW internal 10dBi 2T2R antenna
Supports WEP, WPA and WPA2 security with TKIP/AES encryption
Integrated MAC address control and QoS support
Built-in configuration utility (web-based)
+/-15kV air and +/-8kV contact ESD (Electrostatic Discharge) Protection
www.startech.com/uk
0800 169 0408
Loading...