Startech PEXUSB3S11 User Manual

Page 1
2 port PCI Express SuperSpeed USB 3.0 Card with UASP Support - 1 Internal 1 External
StarTech ID: PEXUSB3S11
The PEXUSB3S11 PCI Express USB 3.0 Card lets you add one internal, and one external USB 3.0 port to your PC through a PCI Express slot.
Featuring a native NEC PCI Express host controller chipset, the new USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility with older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. The inclusion of an internal USB 3.0 connection provides the added benefit of compatibility with USB
3.0-based internal storage solutions or front-bay hubs.
For bus-powered USB devices, this PCIe USB 3.0 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 devices (500mA for USB
2.0).
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows® 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.
www.startech.com
1 800 265 1844
Page 2
At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.
Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP­enabled StarTech.com enclosure, and a SATA III solid state drive.
Applications
Add one internal and one external SuperSpeed USB 3.0 port to a PCI Express compatible PC for high speed connectivity to USB 3.0 compatible peripherals Enable high speed USB communication between your PC and any USB 3.0 enabled external device such as a USB enclosure or Audio Video device Add a reliable, fast, hot-swappable, connectivity solution for backups and data archiving for Desktop, Server and Thin-Client computers
www.startech.com
1 800 265 1844
Page 3
Features
Provides both internal and external USB 3.0 connections Optional SATA power connector for up to 900mA per port output Fully compliant with USB 3.0 revision 1.0 specifications and Intel xHCI rev0.96 specifications UASP support for more efficient data transfer PCI Express 2.0 Compliant Supports USB transfer speeds of 5Gbps (Super Speed), 480Mbps (High Speed), 12Mbps (Full Speed), and 1.5Mbps (Low Speed) Backward compatible with previous USB standards USB ports are Hot Swapping and Plug-and-Play compliant Supports PCI Bus Power Management Interface Specification revision 1.2 Fully supports the following USB Communication Types: Control/Bulk/Interrupt/Isochronous Transfer
www.startech.com
1 800 265 1844
Page 4
Technical Specifications
Warranty Lifetime Bus Type PCI Express Card Type Standard Profile (LP bracket incl.) Chipset ID Renesas / NEC - µPD720200 Interface USB 3.0 Ports 2 MTBF 11,914 Hours Type and
Rate
USB 3.0 - 5 Gbit/s
UASP Support
Yes
Connector Type(s)
1 - PCI Express x1 Male
External Ports
1 - USB 3.0 A (9 pin; SuperSpeed) Female
Internal Ports
1 - SATA Power (15 pin) Plug
Internal Ports
1 - USB 3.0 A (9 pin; SuperSpeed) Female
OS Compatibility
Windows® 8 (32/64bit), 7 (32/34), Vista (32/64), XP (32/64) Windows Server® 2008 R2, 2003
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen
1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5 Gbps.
Product Height
0.8 in [20 mm]
Product Length
2.8 in [70 mm]
Product Weight
1.4 oz [40 g]
Product Width
4.7 in [120 mm]
Humidity 0~85% RH Operating
Temperature
0°C to 50°C (32°F to 122°F)
Storage -20°C to 60°C (-4°F to 140°F)
www.startech.com
1 800 265 1844
Page 5
Temperature Shipping
(Package) Weight
4.6 oz [131 g]
Included in Package
1 - PCI Express USB 3.0 card
Included in Package
1 - Low profile bracket
Included in Package
1 - Driver CD
Included in Package
1 - Instruction Manual
Certifications, Reports and Compatibility
www.startech.com
1 800 265 1844
Loading...