Startech PEX1PCI1 User Manual

PEX1PCI1

PCI Express to PCI Adapter Card

Installation Guide

Packaging Contents

1 x PEX1PCI1 adapter card•

1 x Spare Standard PCIe bracket•

1 x Installation Guide•

System Requirements

PCI Express enabled computer system•

Microsoft Windows•

®

2000 or later

Installation

Install the adapter card into the motherboard PCIe 2.
x1 slot.

Note: PCIe slots are backwards compatible with
smaller PCIe cards, so a x4 or greater slot can be
used.

Connect the 4 pin power connector to the 3.
computer power supply.

Power on the computer and load the operating 4.

Note: If the spare PCIe bracket is used, the bracket on
the PCI card must be removed. Full profile PCI cards
may not fit in the system.

Insert the low profile PCI card into the white PCI 1.
Slot connector on the top of the adapter card.

Warranty Information

This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.

system.

Note: No drivers are needed to install the adapter
card. It only acts as a bridge adapter for the PCI
card.

Specications

Bus Interface

Chipset ID

PCI Card Bus

Power Connector

Operating Temperature

Operating System

Support

PCI Express 1.0a (Host)

PCI rev 2.2 (Device)

Pericom PI7C9X110BNBE

32-bit, 33 MHz

4-pin LP4 Molex

0 - 85oC

Windows® 2000/XP/Vista