Startech MPO8LCPL2M User Manual

MPO/MTP to LC Breakout Cable - Plenum-Rated ­OM3, 40Gb - Push/Pull-Tab - 2 m (6 ft.)

Product ID: MPO8LCPL2M

This MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4

QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.

The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand,

without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and

improves cable management.

The MPO cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is

required.

Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is

included in each cable bag.

The MPO8LCPL2M from StarTech.com is backed by a lifetime warranty.

www.startech.com

1 800 265 1844

Certifications, Reports
and Compatibility

Applications

• Use in 10/40 Gigabit Ethernet and fiber channel applications

• Fan out a single 40Gbps MPO/MTP connection to four 10Gbps LC
connections on devices such as fiber patch panels, hubs, switches,
media converters, and routers

• Used with 40GBase-SR4 networking hardware

Features

• Obtain higher port density with eight LC network connections
combined into a single MPO/MTP connector

• Optimize accessibility and install or remove connectors with one hand
using the push-and-pull tabs

• Save space and improve cable management with slim uniboot
connectors

• Get test data for your fiber cable - an insertion loss and return loss
test report is included in each cable bag

www.startech.com

1 800 265 1844