Startech MPO12PL3M Product Data Sheet

MPO/MTP Fiber Optic Cable - Plenum-Rated - OM3,
40Gb - Push/Pull-Tab - 3 m (10 ft.)

Product ID: MPO12PL3M

This MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking

devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps

switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six

duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual

10Gbps devices.

The MTP connector provides twelve times the density of an SC connector and saves circuit card and rack

space. Plus, the push-and-pull tabs optimize accessibility by letting you install or remove the connectors

with one hand without needing additional tools.

The MTP to MTP cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire

rating is required.

Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is

included in each cable bag.

The MPO12PL3M from StarTech.com is backed by a lifetime warranty.

www.startech.com

1 800 265 1844

Certifications, Reports
and Compatibility

Applications

• Use in 10/40 Gigabit Ethernet and fiber channel applications

• Connect 40Gbps MPO/MTP devices such as fiber patch panels, hubs,
switches, media converters, and routers

• Supports 40GBASE-SR4 and 100GBASE-SR10 in applicable parallel
optics networks

Features

• Interface between different networking devices at varying speeds

• Optimize accessibility and install or remove connectors with one hand
using the push-and-pull tabs

• Save circuit card and rack space with twelve times the density of SC
connectors

• Get test data for your fiber cable - an insertion loss and return loss
test report is included in each cable bag

www.startech.com

1 800 265 1844