10 Gigabit Fiber SFP+ Transceiver Module - HP
J9150A Compatible - MM LC with DDM - 300 m (984
ft)
Product ID: J9150AST
This HP® compatible 10 Gigabit fiber SFP+ is engineered by StarTech.com to deliver what you want most
in your network connections: reliability. Built to exacting specifications and fully tested to ensure
maximum performance, this high-quality fiber transceiver module can be installed into HP networking
devices that support the HP J9150A transceiver module, as well as other major brands of networking
equipment.
This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multimode fiber cable with a range of up to
300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on
your networking equipment, and it's backed by a lifetime warranty.
www.startech.com
1 800 265 1844
Built for reliable network performance
This 10 GbE SFP+ is manufactured by StarTech.com to meet or exceed OEM specifications and comply
with the industry’s MSA (Multi-Source Agreement) standards. Committed to the highest standards of
quality, StarTech.com provides an extensive range of networking products including copper and fiber
network cards, fiber media converters, Ethernet switches and wireless products.
Fully compatible with HP and other major brands
This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is
100% HP compatible, equivalent to the HP J9150A SFP+ transceiver. The StarTech.com SFP+ is
configured and fully tested to ensure it works seamlessly with HP or other major brands of networking
equipment.
You can be assured that the use of StarTech.com SFP products should not affect the warranty protection
of your networking equipment.
Convenient and scalable
Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which
enables you to install it without interrupting network traffic or having to reboot your equipment. It
provides a versatile and cost-effective solution that’s compatible with a wide range of 10 Gigabit
networking devices.
Ideal for use in HP switches, routers and other networking equipment, the SFP+ optical transceiver
provides reliable performance, allowing you to expand your network to remote segments cost-effectively.
The multimode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum
distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps.
You can count on J9150AST for reliable performance, backed by a lifetime warranty and free lifetime
technical support.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Replace defective or damaged SFPs in MSA compliant or HP
equipment
• Ideal for deployment in network devices with multiple SFP slots
• Expand your network to remote segments
Features
• Delivers reliable 10 Gigabit Ethernet connections for 10GBase-SR
compliant networks
• 100% HP compatible, equivalent to J9150A
• Backed by lifetime warranty and free lifetime technical support
• Meets or exceeds OEM specifications and MSA (Multi-Source
Agreement) industry standards
• Supports Digital Diagnostics Monitoring (DDM)
• 850 nm optical wavelength
• Multi-mode with maximum distance of up to 300 m (984 ft) and LC
fiber connector
• Maximum data rates up to 10Gbps
• Hot-pluggable
www.startech.com
1 800 265 1844
Warranty Lifetime
Hardware Industry Standards IEEE 802.3ae 10GBASE-SR
WDM No
Performance Compatible Networks 10 Gbps
DDM Yes
Fiber Operating Mode Full-Duplex
Fiber Type Multi Mode
Max Transfer Distance 300 m (984 ft)
Maximum Data Transfer Rate 11.1 Gbps
Wavelength 850nm
Connector(s) Local Unit Connectors 1 - Fiber Optic LC Duplex Female
Special Notes /
Requirements
Note For use in 10 Gigabit fiber networking equipment and media
converters
System and Cable Requirements MSA or HP compliant SFP+ port
Environmental Humidity 5~95% RH
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Physical
Characteristics
Color Silver
Enclosure Type Aluminum
Product Height 0.5 in [13 mm]
Product Length 2.2 in [57 mm]
Product Weight 0.7 oz [20 g]
Product Width 0.6 in [14 mm]
Packaging
Information
Shipping (Package) Weight 1.8 oz [50 g]
What's in the Box Included in Package 1 - SFP+ transceiver
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...