40 Pin Female IDE to SATA Adapter Converter
Product ID: IDE2SAT25
This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a
2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive.
The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space
and does not impact airflow.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Connect newer SATA devices to older IDE motherboards
• Replace an old IDE hard drive with a new SATA drive
• Small form factor systems with limited room for adapters/converters
Features
• Compliant with SATA specification 1.0 and Ultra ATA-133
• Compact form factor
• No driver/software installation required
www.startech.com
1 800 265 1844
Warranty Lifetime
Hardware Chipset ID JMicron - JM20330
Performance Maximum Data Transfer Rate 133 MBps
Connector(s) Connector Type(s) 1 - IDE (40 Pin, EIDE/PATA) Female
1 - SATA (7 pin, Data) Plug
1 - SP4 (4 pin, Small Drive Power) Male
Software OS Compatibility OS independent; No software or drivers required
Physical
Characteristics
Product Height 0.4 in [9 mm]
Product Length 3.1 in [80 mm]
Product Weight 1.6 oz [44 g]
Product Width 1.3 in [32 mm]
Packaging
Information
Shipping (Package) Weight 3.5 oz [99 g]
What's in the Box Included in Package 1 - IDE to SATA Adapter
1 - SATA Cable
1 - Y Cable (LP4 to LP4 + SP4)
1 - Instruction Manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...