Startech DOCHOLDSTND User Manual
Document Holder - Angle Adjustment
Quick-Start Guide
Product Diagram (DOCHOLDSTND)
Front View
Rear View
3
Component Function
1 Page Holder Tray • Rest a Document on this textured surface
• Secure a Document in place with the
2 Clips
3 Metal Backplate
4 Prop Bar
adjustable Clips
• Can be used to hold open the pages of a
Catalogue or Small Book
• Used to prop up a Document, Catalog,
Small Book, or Tablet
• Adjust the Metal Backplate into 1 of the
7 grooves in the rear of the Page Holder
Tray for dierent viewing angles
Requirements
For the latest requirements, please visit www.startech.com/DOCHOLDSTND.
• Document x 1
21
• (Optional) Catalogue, Small Book, or Tablet x 1
• Clean, Flat, and Stable Surface x 1
Installation and Operation
Tipping hazard! DOCHOLDSTND is free-standing and when it is loaded with a heavy
and/or tall object, you increase the tipping hazard.
1. Place the Document Holder on a Clean, Flat, and Stable Surface, with the Clips
facing upwards.
2. Fold the Clips away from the Document Holder.
3. Lift the Metal Backplate and slide the Prop Bar along the grooves until the desired
viewing angle is met.
Pinch hazard! Ensure all ngers are removed from any potential pinch points when
adjusting the Metal Backplate.
4. Lower the Prop Bar into 1 of the 7 grooves on the Page Holder Tray.
5. Load your Document into the Document Holder, adjusting the Clips as needed.
4
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 28, 2019
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
Loading...